All lamps in Nissan Almera Classic: sockets, power and how to choose high-quality analogues

If you are the owner Nissan Almera Classic (B10, 2006–2012 production) and are faced with the need to replace a burnt-out lamp - in the headlights, dimensions or interior - this article will help you understand the types of sockets, wattage ratings and the best analogues. The model, known in Russia as a budget sedan with a simple design, nevertheless has its own nuances in lighting: from halogen headlights to the miniature lights in the dashboard.

We will not only list all the lamps indicating their markings (For example, H4 for low/high beam), but we will also give practical advice: how to avoid mistakes when replacing, which brands (Osram, Philips, Narva) offer the best price-quality ratio, and why cheap Chinese analogues can result in electrical problems. And also, let’s figure out whether it’s possible to put LED lamps instead of standard halogens, without violating traffic regulations.

Standard lamps in Nissan Almera Classic: complete list by socket

B Almera Classic lamps of three main categories are used: external lighting (headlights, dimensions, brake lights), internal (interior, trunk) and instrument lighting. Below is a table with all types of bases and their purpose. Please note: the data is relevant for restyled and pre-restyled versions (2006–2012), but may differ for export modifications (for example, with DRL - daytime running lights).

Lighting area	Base type	Power, W	Number of lamps
Low/high beam (headlight)	H4	60/55	2
Side light (front)	W5W (or T10)	5	2
Turn signal (front)	PY21W	21	2
Fog lights (PTF)	H11	55	2
Brake light/marker (rear)	P21/5W	21/5	2

⚠️ Attention: In the taillights Almera Classic a combination lamp is used P21/5W — one filament is responsible for the brake light (21 W), the second for the clearance (5 W). When replacing, it is important not to mix up the contacts, otherwise the lights will be on at full power and the brake lights will be dim.

Lamps are used to illuminate the license plate W5W (analogue T10), and in the cabin - miniature C5W (lighting lamp) and T4W (glove compartment light). The instrument panel is illuminated by lamps T5 (1.2 W), but replacing them requires care - the plastic fastening latches are easy to break.

Which lamps are better for Nissan Almera Classic: halogen vs LED

Standard lamps in Almera Classic - halogen, but many owners are considering switching to LED analogues. Let's look at the pros and cons of each option:

• 🔹 Halogen lamps: Cheap (from 200 rubles per pair H4), are easy to replace and do not require modifications. Cons: dim light (especially in the rain), short service life (1–2 years).
• 🔹 LED lamps: 30–50% brighter, lasts 5+ years, heats up less. But: expensive (from 3,000 rubles per set H4), can blind oncoming drivers and require correction of the light beam.
• 🔹 Xenon: Banned in Russia for halogen headlights (fine 3,000 rubles under Article 12.5 of the Administrative Code). The exception is factory bi-xenon lenses (in Almera Classic were not installed).

Important nuance: LED lamps in headlights Almera Classic Without lenses, they create an incorrect light beam, which impairs visibility and blinds other road users. If you still decide to install LEDs, choose models with a built-in cooling system (for example, Philips X-tremeUltinon) and be sure to adjust the headlights after installation.

For clearance and brake lights LED lamps (W5W, P21/5W) fit perfectly - they do not require optical adjustments and are legal. Popular brands: Osram LEDriving, Hella LED, Cree.

Step-by-step instructions: how to replace a low beam bulb (H4)

Replacing the lamp H4 in Almera Classic takes 10-15 minutes and requires no tools. The main thing is not to touch the glass bulb with bare hands: traces of grease lead to overheating and rapid failure of the lamp. Follow the algorithm:

1. Open the hood and turn off the power to the car by removing the battery terminal (negative).
2. Remove the rubber boot from the back of the headlight - it is secured with latches.
3. Disconnect the power supply from the lamp by pressing the latch.
4. Remove the spring clip from the grooves and remove the lamp.
5. Install a new lamp H4, secure with a clamp and connect the block.

⚠️ Attention: If the lamp does not light after replacement, check the fuse F10 (10 A) in the block under the steering wheel - it is responsible for the low beam. Burns out due to short circuit or power surges.

For convenience, you can use magnetic holder — it will help you carefully remove the lamp without dropping it into the engine compartment. If the boot is torn, replace it with a new one (part number 26550-4M000), otherwise moisture will get into the headlight.

Top 5 lamps for Nissan Almera Classic: 2026 rating

Based on reviews from owners and tests by independent experts, we have compiled a rating of the best lamps for Almera Classic. Criteria: brightness, durability, compliance with standards ECE (European safety certificate).

Lamp type	Model	Price, rub.	Features
H4 (halogen)	Osram Night Breaker Laser	1,200 per pair	+30% brightness, resource up to 150 hours.
H4 (LED)	Philips X-tremeUltinon	4,500 per pair	6,000 lm, aluminum radiator.
W5W (dimensions)	Narva LED	300 for 2 pcs.	No CAN bus errors, 5,000 hours of service life.
P21/5W (brake light)	Hella LED	800 per piece	Instant operation, no heating.
H11 (PTF)	Koito Whitebeam III	2,000 per pair	White light (4200K), vibration resistant.

💡 Advice: When purchasing lamps H4 pay attention to the markings. The best option is "Long Life" (extended life) or "Allweather" (improved visibility in rain). Avoid lamps marked "Super Blue" — they give a cold light that penetrates the fog worse.

Common mistakes when replacing lamps and how to avoid them

Even such a simple procedure as replacing a lamp can turn into problems if the design nuances are not taken into account Nissan Almera Classic. Here are the most common mistakes:

• 🚫 Touching the bulb of a halogen lamp. Fatty traces lead to local overheating and swelling of the glass. Use gloves or wipe the flask with alcohol.
• 🚫 Incorrect installation of the headlight boot. If the rubber seal is not in place, dust and moisture will enter the headlight, which will shorten the life of the lamp.
• 🚫 Use of high power lamps. For example, H4 100/90W instead of regular ones 60/55W. This leads to melting of the wiring and the headlight reflector.
• 🚫 Ignoring headlight adjustment after replacement. This is especially critical for LED lamps that have a different light beam.

⚠️ Attention: If after replacing the lamp H4 the low beam works, but the high beam does not (or vice versa), the problem is burnt out filament inside the lamp. In 90% of cases, replacing the lamp with a new one helps, but if the problem persists, check the relay K9 (responsible for high beam) in the fuse box.

What to do if the lamp constantly burns out?

There may be several reasons: power surges in the on-board network (check the generator), moisture in the headlight (inspect the boot), or vibration (for example, due to worn engine mounts). In the latter case, installing lamps with a reinforced base will help, for example, Bosch Gigalight.

Where to buy lamps for Nissan Almera Classic: trusted stores

Lamps for Almera Classic sold in three types of outlets:

1. Official Nissan dealers. Pros: guarantee of original spare parts. Cons: prices are higher than the market (for example, a lamp H4 will cost 800–1,000 rubles. per piece).
2. Auto stores (for example, "Avtosvet", "Lampa.ru"). Wide range of brands (Osram, Philips, Narva), prices are 20–30% lower than dealer prices. Can be ordered online for pickup.
3. Marketplaces (Wildberries, Ozon, AliExpress). The cheapest, but there is a high risk of running into a fake. Check the seller's reviews and ratings.

🔍 Selection advice: When purchasing on marketplaces, pay attention to country of origin. Lamps made in Germany (Osram, Hella) or Japan (Koito), last longer than their Chinese counterparts. Also check for certificate ECE (marking on the packaging) is a guarantee of compliance with European safety standards.

Article numbers of original lamps for Almera Classic:

• 💡 Lamp H4 — 26550-4M025 (Nissan), but it’s cheaper to buy an analogue from Philips (12342PRB1).
• 💡 Lamp W5W (dimension) — 26555-4M000.
• 💡 Lamp P21/5W (stop light) — 26570-4M000.

FAQ: Frequently asked questions about lamps in Nissan Almera Classic

Is it possible to install xenon in Almera Classic headlights?

No, this is prohibited by traffic regulations (fine 3,000 rubles). Xenon lamps require special lenses and headlight washers, which are Almera Classic no. In addition, incorrect installation of xenon blinds oncoming drivers.

Why does H4 burn out quickly after replacing the lamp?

There are several reasons: poor contact in the power supply (oxidation), power surges (check the generator), or vibration (worn out engine mounts). Also make sure that the lamp power does not exceed 60/55 W.

Which lamps are better for foglights (PTF) - halogen or LED?

Halogen lamps are optimal for PTF H11 with a temperature of 3,000–4,000 K (yellow light penetrates fog better). LED lamps in PTF are acceptable, but only with a certificate ECE and the right light beam.

How to remove the headlight to replace the lamp if there is not enough space?

B Almera Classic the headlight does not need to be removed - access to the lamp H4 opens through the engine compartment. If the battery is in the way, temporarily remove the terminals and move the battery to the side.

Where is the low beam fuse located?

fuse F10 (10 A) is located in the fuse box under the steering wheel. Also check the relay K9 (responsible for high/low beam).