What kind of light bulbs are on the Nissan Qashqai J10: complete list with sizes and recommendations

Owners Nissan Qashqai J10 (first generation, 2007–2013) sooner or later they are faced with the need to replace light bulbs - be it a burnt-out headlight, a dim headlight, or a broken brake light. But how to understand the variety of types of bases, capacities and brands? This article will help not only determine what light bulbs are on your Qashqai J10, but will also tell you how to replace them correctly, which analogues to choose and what to look for when purchasing.

We have collected up-to-date information on all car lighting devices - from headlights to license plate lights, including rare interior and trunk lamps. We paid special attention differences in trim levels with halogen and xenon headlights, as well as nuances that even experienced car owners often miss. For example, did you know that in some versions of the J10 the low beam lamp may differ from the standard one? H7? Or that the wrong choice of lamp power in the PTF can lead to melting of the plastic housing of the headlight?

Standard light bulbs in headlights and optics of Nissan Qashqai J10

Head optics are the most popular unit for replacing lamps. B Qashqai J10 Halogen lamps were installed from the factory, but in top trim levels (for example, Tekna) xenon headlights could also be found. Below is a table with the original types of lamps for the basic versions:

Purpose	Base type	Power, W	Quantity (pcs.)
Low beam	H7	55	2
High beam	H1	55	2
Side lights (front)	W5W	5	2
Turn signals (front)	PY21W	21	2
Fog lights (PTF)	H11 or H8	55	2

⚠️ Attention: In models with xenon headlights, low beam is implemented through gas-filled lamps D2S or D2R, and distant - through halogen H7. Replacing xenon with halogen (and vice versa) requires reflashing the light control unit and can lead to errors on the dashboard!

For fog lights on Qashqai J10 there is often confusion between H11 And H8. The difference is that H11 has a single strand construction and is used in most versions, and H8 occurs less frequently - usually in restyled models after 2010. To avoid mistakes, check the markings on the lamp itself or in the instruction manual.

Tail lights: brake, turn and reverse lights

Rear optics Nissan Qashqai J10 combined into a single unit, but each function has its own lamp. It is important to consider here that some lamps serve double duty. For example, in a combination lamp, the same lamp can be responsible for the brake light and the side light.

• 🔴 Stop light/marker: P21/5W — double-filament lamp (21 W for stop, 5 W for clearance). When replacing, pay attention to the position of the base - it has a fixed position for correct focusing of light.
• 🟡 Turn signal: PY21W - the same as in the headlights. When replacing, check the condition of the cartridge: oxidized contacts often cause flickering.
• 🔄 Reverse: W16W — baseless lamp with two contacts. When installing, do not touch the glass bulb - grease marks will shorten its service life.
• 🟠 Fog light: P21W - single-filament lamp. May not be available on some trim levels.

⚠️ Attention: When replacing bulbs in a rear light, it is not uncommon for the plastic socket to break when trying to remove it. To avoid this, treat the cartridge with silicone lubricant or WD-40, let stand for 5-10 minutes, and then gently rock and pull it out.

If the reverse or brake lights do not work after replacing the bulb, check the fuses. B Qashqai J10 Responsible for the rear optics:

• 🔋 Fuse F37 (10A) — brake lights and dimensions.
• 🔋 Fuse F38 (10A) — reverse gear and fog lights.

Light bulbs in the cabin and trunk: what is often missed

Interior lighting and trunk lighting are the areas that owners pay attention to last. However, burnt out lamps here not only create discomfort, but can also indicate electrical problems. B Qashqai J10 The following types of lamps are used:

Lighting area	Lamp type	Features
Interior light (front)	C5W or W5W	Depending on the year of manufacture. Versions with light sensor use C5W.
Individual lighting (rear seats)	W5W	They often burn out due to vibrations. It is recommended to use LED analogues with a rubber damper.
Trunk light	C10W	Lamp with base BA15s. When replacing, check the tightness of the lampshade - moisture ingress leads to corrosion of the contacts.
Glove compartment lighting	W5W or LED	In restyled models (after 2010), LEDs were installed.

💡 Helpful tip: When replacing lamps in the cabin, pay attention to the plastic clips of the lampshades. B Qashqai J10 they often break when dismantled carelessly. To remove the shade, use a flathead screwdriver covered with electrical tape to avoid scratching the plastic.

If after replacing the lamp in the trunk it does not light up, check the limit switch (microswitch) on the lid. Over time, its contacts oxidize or wear out. Cleaning with alcohol or replacing the end switch (part number 26530-4M000) usually solves the problem.

Turn off the ignition and remove the terminal from the battery|Prepare new lamps and tools (screwdriver, pliers)|Check the integrity of the sockets and contacts|Clean the seats from dust and moisture-->

Xenon vs halogen: what you can and cannot do when replacing

Owners Qashqai J10 With xenon headlights, people often face a dilemma: what to do if the lamp burns out? Can it be replaced with halogen or LED? There are several critical nuances here:

1. Xenon lamps (D2S/D2R) have high voltage (up to 25,000 V when ignited), so replacing them requires caution. Never touch the bulb with bare hands - this will shorten the life of the lamp.
2. Replacing xenon with halogen (H7) possible only with replacement of the ignition unit and headlight range control. Otherwise, the light will blind oncoming drivers and an error will appear on the dashboard.
3. LED lamps for head optics Qashqai J10 not certified for road use in Russia and most EU countries. Their installation may result in a fine or refusal to pass a technical inspection.

⚠️ Attention: If, after replacing the xenon lamp, the headlight flashes or lights intermittently, the problem may be in the ignition unit. B Qashqai J10 original units often fail Valeo or Hella. Before purchasing a new one, check the compatibility of the article number (for example, 26150-4M000 for the left headlight).

For those who still decide to switch to halogen, you will need:

• 🔧 Install a headlight with a halogen reflector (article 26010-4M000 for the right one, 26010-4M001 for the left).
• 🔧 Replace the ignition unit with an adapter for halogen lamps.
• 🔧 Reflash the light control unit (in some cases it is necessary to disable the automatic corrector function).

What happens if you install LED in a halogen headlight?

Using LED bulbs in headlights designed for halogen leads to several problems:

1. Incorrect light spot — LED sources have a different luminescence point, which is why the headlight blinds oncoming drivers.

2. Reflector overheating — despite low energy consumption, LED lamps heat the headlight housing in other areas, which can lead to melting of the plastic.

3. Errors on the dashboard — the light control unit detects a power discrepancy and signals a malfunction.

4. Problems with technical inspection — in 2023, Russia tightened the requirements for lighting devices, and uncertified LED lamps become the reason for refusal to issue a diagnostic card.

How to choose analogues: review of the best brands and models

When choosing lamps for Qashqai J10 Many owners are faced with the question: should they buy the original or analogues? Original lamps Nissan (for example, article 26100-4M000 for H7) are expensive, but do not always justify their price. Below are proven analogues from leading manufacturers:

Lamp type	Recommended Brand	Model	Average price, ₽
H7 (low beam)	Osram	Night Breaker Laser +150%	1,200–1,500 per pair
H1 (high beam)	Philips	X-tremeVision +130%	1,100–1,400 per pair
W5W (dimensions)	Narva	Range Power White	300–400 per pair
P21/5W (stop/clearance)	Bosch	Pure Light	250–350 per piece
D2S (xenon)	MTF Light	Argon Pro 4300K	2,500–3,000 per piece

🔍 Expert advice: When choosing lamps for H7 or H1 pay attention to color temperature:

- 3200–3500K — warm white light, close to standard (optimal for city driving).

- 4000–4300K - cool white, improves visibility on the highway, but can be blinding in the rain.

- 5000K and above - a bluish tint, it penetrates fog and rain worse, and often causes fines.

For fog lights (H11 or H8) the best choice would be lamps with a yellow glow (about 3000K), for example, Osram Fog Breaker. They penetrate fog better and do not reflect from water droplets.

Step-by-step instructions for replacing low and high beam lamps

Replacing lamps in head optics Nissan Qashqai J10 does not require special skills, but will require accuracy. Below are detailed instructions for halogen headlights (for xenon the process is more complicated and requires removing the bumper).

Tools: gloves (so as not to leave grease marks on the flask), a screwdriver with a Phillips bit, pliers.

1. Open the hood and remove the headlight protective cover (it is secured with 2-3 plastic latches).
2. Disconnect the power supply from the lamp by pressing the latch.
3. Remove the spring clip, which holds the lamp. To do this, press on it from above and move it to the side.
4. Remove the lamp, pulling it towards you. Do not touch the glass flask!
5. Install a new lamp, aligning the protrusions on the base with the grooves in the headlight. Secure with a spring clip.
6. Connect the power supply and check the operation of the headlight without closing the housing.
7. Close the cover and repeat the process for the second headlight.

⚠️ Attention: After replacing the lamp H7 or H1 Be sure to adjust the headlights! IN Qashqai J10 The adjustment screws are located on the top and side of the headlight (a hex screwdriver is required). Incorrect adjustment blinds oncoming drivers and can cause an accident.

If the lamp does not light after replacement, check:

• 🔌 Correct connection of the pad (sometimes the contacts oxidize - clean them with sandpaper).
• 🔋 Fuse F28 (10A) — is responsible for the low beam.
• 🔧 Wiring integrity (especially if the headlight was blinking before replacement).

Common mistakes and how to avoid them

Even experienced car owners make mistakes when replacing bulbs. Qashqai J10. Here are the most common ones and how to prevent them:

1. Touching the bulb of a halogen lamp with bare hands.

   Greasy fingerprints lead to local overheating of the glass and shorten the life of the lamp. Always use gloves or a cloth. If you do touch it, wipe the flask with alcohol.

2. Use of high power lamps.

   Installation of lamps H7 100W instead of regular ones 55W leads to melting of the reflector and loss of tightness of the headlight. Maximum permissible power - 60W (and then only for lamps with increased luminous efficiency, for example, Osram Cool Blue).

3. Incorrect installation of the plinth.

   Lamp H7 It has an asymmetric base - if it is inserted the wrong way, the light will shine upward or sideways. Focus on the protrusions on the base and the grooves in the headlight.

4. Ignoring headlight adjustment after replacement.

   Even if you installed a lamp of the same model, its position may shift slightly. Check the light spot on the wall (distance to the wall - 5 m, height of the center of the headlight to the floor - 0.6 m). The upper limit of the light spot should be 5–10 cm below the height of the headlight.

🚨 Critical error: Replacing bulbs in one headlight (for example, only low beam) when the second has already exhausted its service life. The difference in the glow of the old and new lamp creates discomfort for the eyes and impairs visibility. Always change bulbs in pairs!

What to do if the lamp constantly burns out?

If the bulbs in the same headlight burn out more than once a year, the problem lies deeper:

1. Increased voltage in the on-board network — check the voltage on the battery with a multimeter while the engine is running (should be 13.8–14.4 V). If higher, the generator voltage regulator is faulty.

2. Poor contact in the socket - oxidized or burnt contacts cause voltage surges. Clean them and treat them with contact lubricant.

3. Vibrations — if the headlight is loose, the lamp is subjected to additional stress. Check the headlight mounts and hood shock absorbers.

4. Moisture ingress — condensation inside the headlight leads to corrosion of the contacts and burnout of the lamps. In this case, you will need to dry the headlight with a hairdryer (temperature no higher than 60°C) or replace the sealant.

FAQ: Answers to frequently asked questions

Is it possible to install LED lamps in PTF Qashqai J10?

Technically yes, but with caveats:

- LED lamps for PTF must have a certificate ECE R19 (For example, Osram LEDriving FOG).

- The power must not exceed 60W (halogen equivalent).

- The light spot must correspond to the standard one - many cheap LED lamps produce “spots”, which impairs visibility.

- In Russia, since 2020, LEDs in PTFs are allowed, but only if they are installed from the factory or have the approval of the State Traffic Safety Inspectorate.

Why after replacing the lamp H7 Is the headlight dim?

Possible reasons:

- Oxidation of contacts in the socket or power supply. Clean them with sandpaper and treat them with contact lubricant.

- Light control unit malfunction (if both headlights are dim). Check the voltage at the lamp socket with a multimeter (should be ~12 V).

- Rejection of a lamp - especially common among cheap analogues. Try installing a different lamp.

- Headlight fogging — moisture inside scatters light. Drying or sealing will be required.

Which bulbs are better for foglights: halogen or LED?

For Qashqai J10 the optimal choice depends on the operating conditions:

- Halogen (H11 3000K) — better at breaking through fog and rain, cheaper to replace. We recommend Philips WhiteVision or Osram Fog Breaker.

- LED (H11) - more durable, but must be with the right optics (for example, Hella LED Beam). Not suitable for heavy fog due to cold light.

- Xenon in PTF — is prohibited by UNECE rules and may cause deprivation of rights.

How to remove the taillight to replace the lamp?

Procedure:

1. Open the trunk and remove the trim from the canopy side (it is secured with clips).

2. Unscrew the two bolts securing the flashlight (a 10mm socket is required).

3. Carefully pull the flashlight towards you without disconnecting the power supply.

4. Turn the socket counterclockwise and remove the lamp.

5. Install the new lamp, observing the polarity (for P21/5W long contact - brake light, short - clearance).

6. Reassemble everything in reverse order, making sure that the sealing rubber of the lantern is intact.

Where to find articles of original lamps for Qashqai J10?

Original lamp articles Nissan for Qashqai J10 (2007–2013):

- Low beam (H7): 26100-4M000 (left), 26100-4M001 (right).

- High beam (H1): 26110-4M000.

- Dimensions (W5W): 26130-4M000.

- Stop light (P21/5W): 26150-4M025.

- Xenon (D2S): 26160-4M000 (set with ignition unit).

- Number plate illumination lamp: 26180-4M000 (W5W).

Original lamps can be ordered using these articles from official dealers or found analogues in catalogs Bosch, Osram or Philips.