Selecting light bulbs for Nissan Almera - a task that sooner or later faces every owner. Not only the quality of lighting, but also safety on the road depends on the correct selection. In this article we will look at which lamps are installed on different generations. Almera (G15, N18, B17), how to distinguish them by markers, which analogues are suitable and what to look for when purchasing.

The peculiarity of the model is that even within the same generation, configurations may differ - for example, Almera G15 with halogen headlights and versions with xenon have different requirements for lamps. We have collected current data for 2026, including catalog numbers of original lamps and proven analogues from Osram, Philips And Bosch.

Types of lamps in Nissan Almera by generation

Before purchasing, it is important to determine what generation your car belongs to. U Nissan Almera There are three main generations relevant for the Russian market:

  • 🔹 B17 (2012–2019) - restyled version with updated headlights, often with halogen H7 in the near light.
  • 🔹 G15 (2019–present) — a modern model with LED optics in top trim levels, but basic versions are equipped with halogen H7/H11.
  • 🔹 N18 (European version, 2012–2018) - differs in the shape of the headlights and uses lamps H4 in a two-strand version for near/far.

To accurately determine the type of lamp, just look at the car's passport or remove the protective cover of the headlight. There is always a marker on the base (for example, H7 12V 55W). If access to the headlight is difficult, use compatibility table below.

📊 What generation of Nissan Almera do you have?
  • B17 (2012–2019)
  • G15 (2019–present)
  • N18 (European version)
  • I don't know, I need to determine

Bulbs in headlights: low, high, dimensions

Headlights are the most important lighting element. B Nissan Almera Different types of lamps are used depending on the configuration:

  • 💡 Low beam:
    • G15/B17 — H7 12V 55W (halogen) or LED modules in top versions.
    • N18 — H4 12V 60/55W (double-filament lamp).
  • 💡 High beam - usually H1 12V 55W (in all generations).
  • 💡 Side lights — W5W 12V 5W (baseless lamp).
  • 💡 Turn signals — PY21W 12V 21W (orange flask).

Important: in Almera G15 from 2022, full-fledged LED headlightswhere there are no lamps as such, diode modules shine. Their replacement is possible only in the service, as it requires disassembling the optics.

⚠️ Attention: If you decide to install LED bulbs instead of halogen, check compatibility with the light control unit. On Almera B17/G15 It is not uncommon for LEDs to cause an error Check Light System on the dashboard.
What happens if you put LED in a halogen headlight?

Incorrectly selected LED lamps can blind oncoming drivers due to the wrong light beam. In addition, overheating of the base sometimes leads to melting of the plastic headlight reflector.

Generation Lamp type Base Power Note
G15 (2019–present) Low beam H7 55W In top versions - LED module
B17 (2012–2019) Near/far H4 60/55W Double filament lamp
N18 (Europe) High beam H1 55W Separate lamp
All generations Dimensions W5W 5W Baseless, often used as DRL
All generations Turn signals PY21W 21W Orange bulb, in some versions colorless with orange diffuser

Light bulbs in the cabin and additional lighting

Interior lighting in Nissan Almera often goes unattended, although burnt out lamps cause inconvenience. Here are the main types:

  • 🔦 Interior lighting — C5W 12V 5W (candle base).
  • 🔦 Glove compartment lighting — W5W 12V 5W (same as in dimensions).
  • 🔦 Dashboard lighting — microlamps T5 12V 1.2W (in older versions) or LED in new models.
  • 🔦 Brake lights and reverse — P21W 12V 21W (red/white flask).

B Almera G15 from 2021, interior lighting has been completely switched to SMD-LED, which last much longer than halogen ones. However, replacing them requires care - the plastic latches securing the lampshade are easy to break.

💡

If the light in the cabin is blinking, check the contacts in the lamp. Often the problem lies in the oxidized connectors, and not in the lamp itself.

Which light bulbs are better to choose: halogen, LED or xenon

The choice of lamp type depends on the budget, lighting requirements and legality of installation. Let's look at the pros and cons of each option:

  • 🔆 Halogen lamps:
    • ✅ Legal, no modification required.
    • ✅ Low price (from 200 rubles per pair).
    • ❌ Service life ~500 hours, fades over time.
  • 💡 LED lamps:
    • ✅ Brightness is 2-3 times higher than halogen.
    • ✅ Service life up to 30,000 hours.
    • ❌ They require adjustment of the light beam (sometimes installation of lenses).
    • ❌ An error may occur on the device.
  • ⚡ Xenon lamps:
    • ✅ Maximum brightness and range of light.
    • ❌ Installation in halogen headlights illegal (fine 500 rubles under Article 12.5 of the Administrative Code).
    • ❌ Requires an ignition unit, complex installation.

For Nissan Almera remain the optimal choice improved halogen lamps with increased brightness (for example, Osram Night Breaker or Philips X-tremeVision). They provide 130–150% more light than standard ones, while being completely legal.

⚠️ Attention: If you still decide to install LED, choose models with correct placement of diodes (For example, Philips Ultinon Pro9000). Cheap Chinese lamps blind oncoming drivers due to the wrong light spot.

Catalog numbers and analogues of original lamps

Original lamps for Nissan Almera supplied by the company Koito (Japan), but their catalog numbers are often duplicated by European manufacturers. Here are the main items:

Lamp type Original number Analogs (Osram/Philips) Price, rub.
Low beam H7 26150-4M000 Osram 64210 / Philips 12972PR 300–800
High beam H1 26155-4M000 Osram 64150 / Philips 12362PR 250–600
Dimensions W5W 26520-4M000 Osram 2825 / Philips 12967 50–200
Turn signals PY21W 26250-4M000 Osram 7506 / Philips 12970 80–300

When purchasing analogues, pay attention to color temperature:

  • 🟡 2800–3200K - warm yellowish light (standard for halogen).
  • 🔵 4000–5000K — white neutral light (optimal for LED).
  • ❄️ 6000K and above — cold bluish tint (impairs visibility in the rain).

💡

For Russian conditions, the optimal color temperature is 4300K - it provides good visibility in all weather conditions.

How to replace a light bulb in a Nissan Almera yourself

Replacing lamps in Nissan Almera does not require special skills, but there are nuances depending on the type of headlight. Let's look at the process using an example low beam (H7):

Turn off the ignition and remove the terminal from the battery|Clean your hands (do not touch the halogen lamp bulb)|Prepare a new lamp and a flathead screwdriver|Check that the headlight is cool (working with hot optics is dangerous)-->

  1. Open the hood and remove protective cover from the back of the headlight (turn counterclockwise).

  2. Disconnect power connector from the lamp by pressing the latch.

  3. Remove spring retainerholding the lamp (pull up or to the side, depending on the model).

  4. Remove the old lamp and install a new one, without touching the flask (use gloves or a cloth).

  5. Reassemble everything in reverse order and check the operation of the headlight.

For replacement H4 lamps (in Almera N18) the process is similar, but care is required when connecting the connector - it can be easily damaged. B Almera G15 with LED optics self-replacement impossible - a service call is required.

⚠️ Attention: If the lamp does not light after replacement, check fuse F10 (10A) in the block under the steering wheel - it is responsible for the low beam. B Almera B17 the relay may also burn out K9 (headlight relay).

Frequent mistakes when choosing and replacing lamps

Even experienced drivers sometimes make mistakes that lead to rapid lamp failure or electrical problems. Here are the most common:

  • 🚫 Touching the bulb of a halogen lamp — fatty traces cause local overheating and reduce service life. Always use gloves or wipe the flask with alcohol.
  • 🚫 LED installation without light beam corrector - blinds oncoming drivers and can cause an accident.
  • 🚫 Buying lamps with high wattage (For example, H7 100W instead of 55W) - leads to melting of the wiring and reflector.
  • 🚫 Ignoring errors on the dashboard after installing LED - may indicate incompatibility with the control unit.

Another typical problem is condensation inside the headlight after replacing the lamp. This happens if the protective cover is not tightly closed. In this case, the headlight “fogs up”, and moisture shortens the life of the lamp and can cause corrosion of the reflector.

How to remove condensation from a headlight?

If the headlight fogs up, remove the protective cover and direct a stream of warm air inside (for example, a hair dryer on minimum power). Do not use heating devices - this may deform the plastic. After drying, check the tightness of the lid and rubber seal.

FAQ: Frequently asked questions about light bulbs in Nissan Almera

Is it possible to install xenon in Almera G15 halogen headlights?

No, it's illegally. According to the Technical Regulations of the Customs Union, xenon lamps are allowed only in headlights with the marking D (for xenon). B Almera G15 Halogen headlights are installed from the factory (H or HR), so for installing xenon you can get a fine of 500 rubles. (Article 12.5 of the Administrative Code).

Which H7 lamps are the brightest for Almera?

According to test results in 2026, halogen lamps are the best in brightness H7:

  1. Osram Night Breaker Laser (+150% light).
  2. Philips X-tremeVision Pro150 (+150% light, resource 450 hours).
  3. Bosch Gigalight Plus 150 (+120% light, vibration resistant).

The leader among LED lamps is Philips Ultinon Pro9000 (300% halogen brightness), but requires modification to the headlight.

How long do light bulbs last in Almera?

Service life depends on type:

  • 🔹 Halogen - 400–600 hours (2–3 years with an average load).
  • 🔹 LED — 10,000–30,000 hours (up to 10 years).
  • 🔹 Xenon — 2,000–4,000 hours (4–5 years old).

In practice, halogen lamps in Almera often burn out earlier due to vibrations and power surges. To extend service life, use a voltage stabilizer or regulator relay.

Why do light bulbs burn out quickly in Almera B17?

Main reasons:

  1. Increased voltage in the on-board network (normal - 13.8–14.4V). Check the voltage on the battery with a multimeter while the engine is running.
  2. Vibrations - in Almera B17 poor damping of the lamp in the headlight. Solution: use lamps with a reinforced base (for example, Bosch Gigalight).
  3. Poor contact in the connector - oxidation or burning of contacts leads to current surges.

If the lights come on more than once a year, check voltage regulator relay (in the generator) and mass on the body.

Is it possible to install LED in Almera PTF?

Technically yes, but there are some nuances:

  • ✅ B Almera G15 from 2020, PTF has lamps H11, for which there are legal LED analogues (for example, Osram LEDriving FOG).
  • ❌ B Almera B17 PTF use lamps H3, and replacing it with LED may cause an error on the device.
  • ⚠️ Pay attention to certification — LED lamps for PTF must be marked E (UNECE approval).