Removing the rear sofa Nissan Almera G15 (2012–2019) may be needed to clean the interior, repair electrical wiring, replace trim, or access the fuel pump. Unlike many European cars, where the seat is secured with latches, Almere bolts and staples are used - this complicates the process, but makes it more reliable. In this article we will analyze step-by-step algorithm removing the sofa without damage, taking into account typical mistakes and unique mounting features of this particular model.

Important: the design of the rear row is Almera G15 different from previous generations (for example, Nissan Almera Classic). There are no classic hinges under the seat - instead, guides with locks are used, which are easy to break if dismantled incorrectly. If you are planning to remove a sofa for the first time, be patient and have some tools: a wrench 10 mm, a flat blade screwdriver and plastic mounting blades.

Preparing for dismantling: tools and safety precautions

Before you get started, make sure you have everything you need. Missing even one tool can damage the plastic clips or trim. Here minimum set:

  • 🔧 Socket or socket wrench 10 mm (for fastening bolts).
  • 🔨 Screwdriver with a flat blade (for prying off plastic plugs).
  • 🧲 Plastic mounting spatulas (so as not to scratch the interior).
  • 📦 Container for small items (bolts, clips, plugs are easily lost).
  • 🧹 Vacuum cleaner or brush (cleaning after removing the sofa is mandatory!).

Also prepare your workspace: move the front seats as far forward as possible, remove rugs and debris from under your feet. If it's cold inside, warm up the car for 10-15 minutes - the plastic will become more elastic and the clips will be easier to remove.

⚠️ Attention: Do not start work if there is high humidity in the interior (for example, after washing). Condensation on metal parts may cause bolts to corrode during reassembly.
📊 How often do you remove the back seat in a car?
  • For repairs only
  • Once a year for cleaning
  • Never filmed
  • Other

Step 1: Removing the headrests and upper backrest

We start by dismantling the headrests - this will free up access to the backrest fastenings. B Nissan Almera G15 The headrests are fixed in the classic way: press the button at the base and pull up. If the headrest does not budge, do not jerk it sharply - most likely, the spring mechanism is jammed. In this case:

  1. Rock the headrest left and right to release the guides.
  2. If that doesn’t help, remove the rack trim (carefully pry it off with a screwdriver) and check to see if any debris has gotten into the mechanism.

After removing the headrests, we proceed to the backrest. B Almere G15 it is attached to the body with two bolts under plastic plugs (bottom, near the floor). To remove them:

  • 🔍 Find the plugs - they are located symmetrically on both sides of the back.
  • 🔨 Pry them off with a screwdriver or a plastic spatula (be careful not to break the clamps).
  • 🔧 Unscrew the bolts with a wrench on 10 mm (don't lose the pucks!).
💡

If the bolts are stuck, spray them with a penetrating lubricant (such as WD-40) and wait 5-10 minutes. Do not use force - stripped threads will complicate assembly.

Step 2: Dismantling the bottom of the sofa

Now let's move on to the most important part - removing the lower seat. B Nissan Almera G15 it is attached to the body four bolts (two on each side) and two clamps front. Algorithm of actions:

  1. Move the front seats all the way forward.
  2. Tilt the back of the rear sofa forward (it should lock in a horizontal position).
  3. Lift the front of the seat up and you will see two bolts on each side.
  4. Unscrew the bolts with a wrench 10 mm.

Once the bolts are removed, the seat will still be held in place by the brackets. To release them:

  • 🔄 Pull the seat towards you (toward the front seats) with a force of ~10–15 kg.
  • 🔊 You will hear a characteristic click - this means that the staples have come out of the grooves.
  • 🚗 Carefully remove the sofa from the interior (preferably together, so as not to scratch the plastic).
⚠️ Attention: Do not pull the seat up - the brackets may bend! The movement must be strictly horizontal, backwards.

Headrests removed|Backrest bolts removed|Front seats moved back|Bracket tool prepared|Maneuver space cleared-->

Common mistakes and how to avoid them

Even experienced car owners make mistakes when removing the rear seat in Almera G15. Here are the most common ones and how to prevent them:

Error Consequences How to avoid
Broken threads of bolts Assembly problems, need for a tap Use a quality wrench and WD-40 lubricant
Broken plastic clips Creaks, back play after assembly Pry with spatulas, do not use force
Seat distortion when removing Bent brackets, difficult installation Shoot strictly horizontally, without jerking
Lost bolts/washers Inability to secure the sofa back Place parts in container

Pay special attention to the fasteners. B Almere G15 They are made of thin metal and can bend if dismantled carelessly. If the bracket is deformed, it can be straightened with pliers, but it is better to replace it with a new one (the article number of the original part is 80310-4M000).

What to do if the bolt breaks in its socket?

If the bolt breaks off while unscrewing, do not panic. Use an extractor or drill out the remains with a 5mm drill (be careful not to damage the threads in the body!). After this, cut a new thread with an M6 tap and install a larger diameter bolt (M7) with a wing nut.

Cleaning and maintenance after removing the sofa

When the sofa is removed, you have a unique opportunity thoroughly clean the interior and check hidden elements. Here's what to do:

  • 🧹 Vacuum the floor under the seat (sand, crumbs, leaves accumulate there).
  • 💦 Wipe the plastic panels with a damp cloth and car shampoo.
  • 🔋 Check the condition of the wiring (especially if there are problems with heated seats or seat belts).
  • 🛢️ Inspect the fuel pump (access to it is open - check for leaks).

If you removed the sofa to clean the upholstery, use special products for fabric or leather (depending on the material). For Almera G15 Suitable with fabric covering Autoglym Interior Shampoo, for leather - Leather Honey. Do not use aggressive solvents (such as White spirit) - they can damage the structure of the material.

💡

After cleaning, be sure to dry the trim with a hairdryer or in the sun. A damp cloth can cause mildew and unpleasant odors.

Assembly: how to put the sofa back

Installing the sofa is done in reverse order, but there are a few key nuancesthat are often missed:

  1. Before installation, check that all clips and bolts are in place.
  2. Start by attaching the brackets: insert the front of the seat into the grooves and press until it clicks.
  3. Tighten the bolts crosswise (first the two front ones, then the two rear ones) to avoid distortion.
  4. Install the backrest, tighten the bolts and return the plastic plugs.
  5. Check the operation of the head restraints - they should be fixed in any position without play.

After assembly, check:

  • 🔒 Reliability of fastening (shake the sofa - there should be no squeaks or backlash).
  • 🔌 Seat belts work (they should not jam).
  • 🔥 Seat heating functionality (if it is included in your configuration).
⚠️ Attention: If the seat belts do not retract after reassembly, check for wiring under the seat. B Almere G15 The seat belt sensors are located just under the rear seat.

Modifications and tuning: what can be done after removing the sofa

A removed sofa opens up opportunities for interior tuning. Here are a few ideas that owners are implementing Nissan Almera G15:

  • 🔥 Installation of heated seats (kits suitable from Nissan Note or Micra).
  • 🎵 Installation of a subwoofer or speakers in the floor under the seat.
  • 🔋 Laying additional wiring (for example, for a DVR or charging).
  • 🛋️ Replacing the upholstery with leather or Alcantara (popular among owners Almera Nismo).

If you plan to install heating, pay attention to kits with a thermostat (for example, Webasto Thermo Top). They prevent overheating and extend the life of the system. For mounting speakers, models with a depth of no more than 6 cm are suitable - otherwise they will rest against the fuel tank.

💡

Before installing electronics (heating, audio), disconnect the negative terminal of the battery. B Almere G15 The fuse box is located under the hood, but it's better to be safe.

FAQ: Frequently asked questions about removing the rear sofa

Is it possible to remove a sofa without a 10 mm key?

Theoretically yes, but not recommended. Bolts in Almera G15 have a high tightening torque, and using the wrong tool (for example, an adjustable wrench) can break the edges. As a last resort, you can use a 10 mm socket with a ratchet.

How long does dismantling take?

If you have experience - 15–20 minutes. If you are renting for the first time, allow 30–40 minutes (including cleaning and inspection). The main time is spent on carefully removing the plastic plugs and working with the staples.

What should I do if the sofa creaks after assembly?

Creaking noise is usually caused by loose brackets or loose bolts. Check:

  • Are all bolts tightened (tightening torque: 8–10 Nm).
  • Are the staples bent (straighten them if necessary).
  • Is there any debris between the seat and body?

If the squeak remains, treat the contact surfaces with silicone grease.

Are the instructions suitable for Nissan Almera Classic?

No, the fastening design is Almera Classic (until 2012) is fundamentally different. It uses latches instead of bolts, and the backrest is removed separately from the bottom of the seat.

Is it possible to wash a removed sofa in the washing machine?

Absolutely not! Rear sofa covers Almera G15 They have a rigid base and a foam layer that deforms when machine washed. The maximum is manual cleaning with car shampoo and a brush.