Many owners of compact crossovers Nissan Juke are faced with the question of why there is an unpleasant odor or fogging of the windows in the cabin. Often the problem lies in an element that even experienced car owners forget about - the cabin filter. Its timely replacement ensures clean air and a comfortable ride.
The location of this consumable on a Japanese car may not seem obvious due to the specific layout of the front panel. Unlike many competitors, you have access to the filter Nissan Juke requires accuracy and understanding of the glove compartment design. Ignoring this element leads to a decrease in the efficiency of the air conditioner and an increase in the load on the heater motor.
Replacing it yourself does not take much time if you know the exact location of the node. You don't have to go to the dealership to save a significant amount of money. It is enough to prepare a minimum set of tools and allocate 15-20 minutes of free time for the procedure.
Localization of the filter in different generations of the model
It is important to understand that the location of the element may vary slightly depending on the year of manufacture and the market. For the first generation Nissan Juke (F15 body), produced from 2010 to 2019, the filter is located behind the glove box. This is a classic scheme for many Renault-Nissan cars.
Owners of restyled versions should be careful, as the mounting design may have changed slightly. However, the principle of access remains the same: it is necessary to dismantle or fold down the box for small items. If you own the second generation (F16), access is similar, but the shape of the plastic plugs may differ.
Some early modifications were equipped with a coarse filter without a carbon layer, which required more frequent replacement. Modern analogues often have activated carbon, which better traps odors and fine dust. Check your equipment Nissan Juketo choose the right type of consumable.
Necessary tools and preparation
Before starting work, make sure you have everything you need on hand. You don't need complicated special tools or a lift. The main task is to carefully unfasten the plastic latches without breaking their fragile tendrils. A flathead screwdriver with a rounded end is ideal for this.
It is also recommended to prepare a flashlight, since the lighting in the glove compartment niche may not be sufficient to inspect the condition of the filter. This will help you assess the degree of contamination and understand whether replacement is needed or you can simply blow out the element with compressed air.
Don't forget to buy a new filter in advance. The original number often changes depending on the region, so it is better to focus on proven analogues from well-known brands. A high-quality element will last longer and purify the air in the cabin more effectively.
- 🛠️ Phillips screwdriver (PH2) for unscrewing the glove box mounting screws
- 🔦 Flashlight for illuminating the interior space of a niche
- 🧤 Clean gloves to avoid getting your hands dirty with dust and dirt
- 🆕 New cabin filter with carbon layer
Step-by-step instructions for removing the glove compartment
The process begins by completely clearing the glove box of all items. This is necessary so that nothing falls into the niche when unfastening and so that you can freely manipulate with your hands. Open the door and carefully remove all contents.
Next you need to unscrew the mounting bolts. On Nissan Juke Usually two screws are used, located at the bottom of the glove compartment. Use a Phillips screwdriver to unscrew them completely and put them in a safe place so you don't lose them.
After this, you need to unfasten the opening limiter. There is a special plastic stop on the side of the glove box that prevents the door from opening too wide. Push it with your finger or a screwdriver to release the latch.
Carefully move the side walls of the glove compartment inside the cabin. The plastic can be tough, so work evenly without applying excessive force. As soon as the sides are free, the door will drop down, allowing access to the filter.
☑️ Preparation for replacement
⚠️ Attention: Be extremely careful with the plastic latches on the side walls. They are quite fragile and can break if moved suddenly, which will lead to squeaks in the future.
If you've never done this before, the process may seem daunting because it's cramped. The main thing is to take your time and listen for the characteristic clicks when the latches are unfastened.