Where are the fuses on the Nissan Tiida: diagram, purpose and replacement

Nissan Tiida is a popular compact car known for its reliability and ease of maintenance. However, even in such a machine, electrical problems periodically arise, and most often they are associated with blown fuses. Knowing their location and purpose will help you quickly fix the problem without calling service.

In this article we will take a closer look at where they are fuse blocks in Nissan Tiida different generations (C11 and C13), we will tell you about the purpose of each element and give step-by-step instructions for replacing them. You will also learn how to correctly diagnose a malfunction and avoid mistakes during repairs.

How many fuse boxes are there in Nissan Tiida and where are they located?

B Nissan Tiida provided two main fuse boxes:

• 🔧 Main unit in the cabin — located under the steering column, to the left of the pedals. It can be accessed after removing the protective cover.
• ⚡ Additional block under the hood — located next to the battery, in a plastic box with a lid.

In some modifications (for example, Tiida Latio or restyled versions) a third may be present, small block - it is usually hidden behind the glove compartment or under the center console. However, in most cases, two basic ones are enough.

It is important to note that the location of the fuses may vary slightly depending on the year of manufacture and configuration. For example, in Nissan Tiida 2007–2010 (C11) the block diagram under the hood is simpler than in models 2011–2016 (C13).

Main fuse box in the cabin: diagram and purpose

The most popular unit is located in the cabin, as it is responsible for the majority of consumers: from lighting to the multimedia system. To get to it:

1. Open the driver's door and sit down to see under the steering wheel.
2. Find the plastic cover that says FUSE or fuse pictogram.
3. Carefully pry the cover with a screwdriver or your fingers and remove it.

Under the cover you will see a fuse and relay box. On the back of the cover there is usually a diagram with symbols. If it is not there, use our table:

Number	Amperage (A)	Purpose	Notes
1	10	Audio system, navigation	Burns out when there is a short circuit in the speakers
7	15	Cigarette lighter	Often fails when using powerful devices
10	7.5	Side lights (left side)	Check when the lamps are flashing
15	10	Engine control unit (ECU)	Replace only with the ignition off!
20	20	Window lifters	Window Operation Problems - Check This Fuse

Please note: in Tiida with an automatic transmission there is a fuse in the block AT (usually 10A), responsible for the operation of the automatic transmission selector. Its failure may make it impossible to shift gears!

Turn off the ignition|Remove the block cover|Visually inspect the fuses for opens|Check with a multimeter (if in doubt)|Install a new fuse of the same amperage-->

Fuse box under the hood: what's there

The second unit is located in the engine compartment, next to the battery. It is responsible for high-voltage circuits: starter, generator, ignition system, etc. To open it:

• 🔋 Open the hood and find a black plastic box with a lid.
• 🔧 Press the latches on the sides and remove the cover.
• 📋 There should be a diagram on the inside of the lid (if there is none, see below).

In this block the fuses are more powerful - from 20A to 100A. Here are the key elements:

Number	Amperage (A)	Purpose	Consequences of burnout
30	100	Main fuse (battery)	Complete blackout of the car
35	40	Radiator fan	Engine overheating
40	30	ABS and stability control system	The ABS light on the dashboard is on
45	20	Fuel pump	The engine does not start or stalls

⚠️ Attention: Fuel pump fuse (45) is often confused with a relay. If the car does not start, check it first - it may burn out due to a sudden power surge or short circuit in the circuit.

Also in this block are located fuse links (fusable links) - they look like thick wires in insulation. Replacing them requires a soldering iron and electrical skills.

How to check and replace a fuse: step-by-step instructions

Replacing a fuse is a simple procedure, but requires care. Follow the algorithm:

1. Turn off the ignition and remove the key from the lock. This will prevent short circuit.
2. Find the faulty fuse. Visually inspect it for broken wires inside or melted housing. If in doubt, use a multimeter in dial mode.
3. Remove the fuse special forceps (usually included with the machine) or tweezers. Never use metal objects - this can damage the contacts!
4. Install a new fuse same amperage. Installing a fuse with a higher rating will result in a fire!
5. Check circuit operation. Turn the ignition on and make sure the problem is resolved.

If after replacement the fuse blows again, this indicates short circuit in the chain. In this case, wiring diagnostics are required - it is better to contact an auto electrician.

What to do if the fuse is stuck to the contacts?

If the fuse cannot be removed with pliers, do not use excessive force as this may break the fuse. Try gently rocking it from side to side or using plastic tweezers. As a last resort, disconnect the battery and clean the contacts with alcohol or WD-40, then try again.

Common problems with fuses in Nissan Tiida

Owners Nissan Tiida often encounter typical faults related to fuses. Here are the most common:

• 🔌 Cigarette lighter fuse blown (7.5A or 15A) — occurs when connecting powerful devices (compressors, inverters). Solution: Use a protected power strip or connect devices directly to the battery.
• 💡 Frequent blowing of the size fuse (7.5A) - the cause may be oxidation of the contacts in the headlights or the installation of LED lamps without resistors.
• 🚗 ABS fuse (10A) blows when driving over uneven surfaces — Check the wheel sensors for damage or corrosion.
• 🔊 The audio system fuse (10A) blows when the radio is turned on. - short circuits in the speakers or damaged wires are to blame.

⚠️ Attention: If in your Tiida electrical problems started after a car wash or rain, check the fuse box under the hood for moisture. The contacts could be oxidized, which leads to false alarms. In this case, dry the unit with a hairdryer (cold air!) and treat the contacts LIQUI MOLY Kontakt-Spray.

Another common problem is melting fuse sockets in the block. This occurs due to the use of fuses of the wrong rating or poor contacts. If melting is noticed, the unit must be replaced - further operation is dangerous!

Where to buy fuses for Nissan Tiida and which ones to choose

Fuses for Nissan Tiida They are sold at any auto store, but it is important to choose quality parts. Here's what you need to know:

• 🛒 Genuine Nissan fuses - the most reliable, but also the most expensive. Article number for standard set: 28510-JD00A (for C11) and 28510-4M01A (for C13).
• 🔧 Analogues from Bosch, Hella or VAG - not inferior in quality, but cheaper. The main thing is that the denomination matches.
• ⚠️ Chinese no-name fuses - often have an inaccurate rating (for example, instead of 10A - 8A or 12A). Their use is not safe.

When purchasing, pay attention to:

• 📏 Size - in Tiida fuses are used Mini Blade (small) and Standard Blade (large).
• 🔢 Denomination - it is indicated on the fuse body (for example, 10A, 15A).
• 🛡️ Quality of contacts — good fuses have legs that do not bend or oxidize.

Advice: buy set of fuses of different ratings and store it in the glove compartment. This will save time in case of breakdown. It is also useful to have a spare relay for the fuel pump (Nissan 25230-JD00A) - it often fails.

Tips for caring for fuse boxes

To keep the fuses in your Nissan Tiida served longer, follow simple recommendations:

1. Check your contacts regularly for oxidation. Clean them with alcohol or a special liquid (for example, CRC 2-26).
2. Avoid moisture into blocks. If the car is often parked in the rain, treat the lid seals with silicone grease.
3. Don't overload the circuits. For example, do not connect several powerful devices to the cigarette lighter at the same time.
4. Check fuses at the first sign of trouble: lamps flashing, power windows failure, radio not working.

It is also useful to carry out once a year preventive examination:

• 🔍 Check the tightness of the fuses in the sockets.
• 🔌 Make sure that all relays are fixed without play.
• 📋 Check the diagram to see if there are any “extra” fuses (sometimes previous owners install them in free slots).

If you notice that fuses are starting to blow more often than usual, this may indicate generator problems (battery overcharge) or short circuit in the wiring. In this case, a comprehensive diagnosis is required.

FAQ: Frequently asked questions about Nissan Tiida fuses

Is it possible to replace a fuse with a higher rating if it keeps blowing?

No! Installing a fuse with a higher rating (for example, 20A instead of 10A) may result in wiring fire. If the fuse blows repeatedly, look for the cause - usually a short circuit or a faulty consumer (for example, a window lift motor).

How can you tell if a fuse has blown if you can't see it visually?

Use the multimeter in dialing mode:

1. Set the multimeter to diode or resistance testing mode.
2. Touch the probes to the fuse contacts.
3. If the device shows 0 or low resistance - the fuse is good. If 1 or OL - burned out.

You can also replace a suspicious fuse with a known working fuse of the same rating.

Where is the central locking fuse located?

B Nissan Tiida The fuse controls the central locking No. 12 (10A) in the salon block. If it is working, but the locks do not work, check:

• 🔋 Fuse No. 25 (7.5A) - responsible for the body control module (BCM).
• 🔧 Central locking relay (usually located next to the fuse box).
• 📡 Key antenna (may be damaged).

Why does it blow again after replacing the cigarette lighter fuse?

This indicates short circuit in the chain. Common reasons:

• 🔌 Damaged wires under the cigarette lighter (rubbed insulation).
• 🔋 Faulty cigarette lighter connector (oxidation or burning of contacts).
• 📱 Connecting a faulty device (for example, charging with a short circuit).

Disconnect the cigarette lighter from the wiring and check the circuit with a multimeter.

Is it possible to drive without a fuse if it's blown?

Absolutely not! The fuse protects the circuit from overload. If you remove it, it may cause a short circuit. wiring lights up or failure of expensive components (for example, an engine control unit). As a last resort, you can temporarily install a fuse of the correct rating, but do not leave the socket empty!