Rear left light of the <em>Nissan Almera G15</em>: selection, replacement and repair

Nissan Almera G15 is a popular sedan that is valued for its reliability and availability of spare parts. However, even in such cars, lighting elements fail over time, and the rear left light is no exception. Owners are faced with problems: from banal lamp burnout to housing cracks or contact oxidation. In this article we will look at how to choose the right original or analog part, replace it yourself and avoid common mistakes.

Feature of the rear left light on Almera G15 (2012–2019) - its unified design with the right side, but with a mirror arrangement of fasteners and connectors. This simplifies the search for spare parts, but requires attention when purchasing: some Chinese analogues may not fit in geometry. We've analyzed SKUs, prices and reviews to help you make an informed choice.

Articles and analogues of the rear left lamp for Nissan Almera G15

Original rear left light for Almera G15 has an article number 26450-4M000 (or 26450-4M00A for restyled models 2016+). The cost of a new part from an official dealer is from 8,000 to 12,000 rubles, which seems overpriced to many. Fortunately, the market offers worthy analogues:

• 🔹 TYC (article 20-6537-00-1) is a popular brand with good reviews, price ~4,500 rubles.
• 🔹 Depo (article 335-1138L-AS) is a budget option (~3,800 rubles), but there are complaints about the tightness of the glass.
• 🔹 Hella (article 8FL 008 307-341) is a premium analogue (~7,000 rubles), characterized by durability and a clear cut-off line.
• 🔹 Koito (article NLA15-L) - Japanese quality (~6,200 rubles), but is rarely found on the open market.

When choosing an analogue, pay attention to ECE certification (marking on glass) is a guarantee of compliance with safety standards. Also check the package contents: some kits do not include lamps or rubber seals, which will require additional expenses.

Typical faults: when is replacement needed?

Rear left light on Almera G15 may fail for several reasons. Most often, owners encounter the following problems:

• 💡 The brake light or parking light is burnt out - the most harmless breakdown, but it cannot be ignored: it is a fine of 500 rubles. according to Art. 12.20 Code of Administrative Offences.
• 🔌 Oxidation of contacts in the connector — leads to flickering or complete failure of the flashlight. This is especially true for machines operated in regions with high humidity.
• 🔧 Cracks in the case or glass — arise from vibrations or mechanical damage. Moisture gets in through the cracks, which accelerates corrosion.
• 🔋 Faulty LED modules (in versions with LED) - diodes fade over time or stop working in sections.

Before purchasing a new flashlight, check fuse F24 (10A) in the mounting block - it is responsible for the chain of rear lights. If the fuse is intact and the problem remains, you will need to diagnose the wiring or replace the unit.

⚠️ Attention! If after replacing the lamp the flashlight still does not work, do not rush to buy a new part. Often to blame loss of mass on the body - check the wire going from the lamp to the bumper mounting bolt (from the trunk side).

Step-by-step instructions for replacing the rear left light

Replacing the flashlight with Almera G15 does not require special skills, but will require accuracy. The whole process will take 30–40 minutes. You will need:

• 🔧 Phillips screwdriver (or T20 bit).
• 🔧 Plastic puller or flat screwdriver (for removing clips).
• 🔧 New flashlight + lamps (if replacement is required).
• 🔧 Silicone grease (for seal).

Sequence of actions:

1. Open the trunk and remove the trim on the left taillight side. It is attached to 3 plastic clips - use a puller to pry them off, starting from the top corner.

2. Unscrew the 3 bolts securing the flashlight: two in the trunk and one on the outside (under the decorative plug).

3. Carefully pull the flashlight towards you without applying force - it is connected to the wiring. Disconnect the connector by pressing the latch.

4. If the bulbs need to be replaced, turn the socket counterclockwise and remove it. For LED versions, you may need to unsolder the contacts.

5. Install the new light in the reverse order. Before installation, apply silicone grease to the seal - this will prevent moisture from entering.

The connector is connected correctly (the contacts should not dangle)

Integrity of the sealing rubber

Operation of all lamps (side, stop, turn, reverse)

No backlash when attaching bolts -->

If you have version with LED lights, please note: replacing them is more difficult due to the need for soldering. In this case, it is better to contact a service center or buy an assembled flashlight.

Price comparison: original vs analogues vs used

The choice between a new original flashlight, an analogue or a used part depends on your budget and goals. Below is a table with current prices (as of June 2026) for Moscow and the regions:

Part type	Price, rub.	Pros	Cons
Original (new)	8 000–12 000	100% compatibility, long service life, warranty	High price, possible fakes
Analogue (TYC/Hella)	3 500–7 000	Acceptable quality, fast delivery	There may be problems with sealing
Used (disassembly)	2 000–4 500	Low price, original part	Risk of hidden defects, short service life
Chinese no-name	1 800–3 000	Minimum cost	Poor light output, fragile plastic

When purchasing a used flashlight, be sure to check:

• 🔦 Integrity of glass and case - even small cracks will lead to fogging.
• 🔦 Performance of all lamps — especially the brake light and turn signal.
• 🔦 Connector status - oxidized contacts will have to be cleaned.

Common replacement mistakes and how to avoid them

Even experienced car owners sometimes make mistakes that lead to repeated replacement or damage to the electrical system. Here are the most common:

1. Incorrect installation of seal. If the rubber is dislodged or torn, moisture will get inside the flashlight, which will lead to corrosion of the contacts. Always apply silicone grease to the seal before installation.

2. Mixed up lamps. B Almera G15 The rear left lamp has the following layout:

   • 🔴 P21W — brake light/marker (double-strand).
   • 🟡 PY21W — turn signal.
   • ⚪ W16W - reverse.

Installing the wrong type of lamp (for example, P21/5W instead of P21W) will lead to incorrect operation of the light.

Torque the bolts. The body of the flashlight is plastic - if you overtighten the fasteners, it may burst. Tighten the bolts by hand until they stop, and then tighten them 1/4 turn.

⚠️ Attention! If after replacement the flashlight fogs up from the inside, this is a sign depressurization. Don't ignore the problem: moisture will eventually destroy the reflector and contacts. The solution is to coat the joints with sealant or replace the seal.

Upgrade: installation of LED lamps or full LED lamp

Many owners Almera G15 want to improve the appearance of the car by installing LED lights. This is possible, but there are some nuances:

• 🔧 Replacing lamps with LEDs — budget option (~1,500–3,000 rubles per set). However, not all diodes are suitable: you need models with built-in resistor (For example, Philips X-tremeUltinon or Osram LEDriving), otherwise there will be an error on the dashboard.
• 🔧 Installing a full LED light (article 26450-4M010 for restyling) - cost from 15,000 rubles. Requires modification of wiring and adjustment of light control unit.

Advantages of LED lights:

• ✅ Brightness is 30–50% higher compared to halogen.
• ✅ Service life up to 50,000 hours (versus 1,000–2,000 for incandescent lamps).
• ✅ Instant activation (important for brake lights).

Disadvantages:

• ❌ High price of quality kits.
• ❌ Risk of blinding drivers from behind if incorrectly configured.
• ❌ There may be problems with passing maintenance (if the lights are not certified).

How to avoid CAN bus error when installing LED?

If, after replacing the lamps with LEDs, an error message appears on the dashboard (for example, "Check Rear Lamp"), the cause is low power consumption of the LEDs. Solutions:

1. Install load resistors (resistance 6–24 Ohms) parallel to the lamps.

2. Use lamps with built-in snag (For example, Morimoto XB).

3. Reflash the light control unit (requires contacting service).

Where to buy: trusted stores and dismantling shops

When purchasing a rear left light for Almera G15 It is important to choose a reliable seller to avoid fakes or defects. We recommend the following options:

• 🏬 Official Nissan dealers - guarantee of an original part, but high price. Check promotions: sometimes they offer discounts of up to 20% on spare parts.
• 🛒 Online stores:
  • Exist.ru — wide range of analogues, fast delivery.
  • Autodoc.ru — convenient selection by VIN, frequent sales.
  • Kolesa-darom.ru — to search for used parts with a guarantee.
• 🔧 Local showdowns - for example, "Avtorazbor 24" (Moscow), "Avtosklad" (St. Petersburg). Before purchasing, check the reputation on the forums (for example, Drive2 or Almera-Club.ru).

Important: when purchasing, check whether the flashlight is suitable for your modification Almera G15 (dorestyle or restyle). Differences in fasteners and connectors may make the part incompatible.

FAQ: answers to frequently asked questions

Is it possible to drive with a broken tail light?

No. According to clause 3.3 List of faults, in which the operation of the vehicle is prohibited, the absence or non-functioning brake light/clearance is grounds for a fine (500 rubles) or a ban on further movement until the malfunction is eliminated.

How to check if the flashlight is working if there is no assistant?

Can be used mirror or smartphone:

1. Park the car in front of a wall or fence.
2. Turn on your tail lights/brake lights.
3. Move 5-10 meters away and take a photo of the reflection against the wall. The photo will show whether the lamp is on.

An alternative is to use diagnostic scanner (For example, ELM327) to check the light control unit signals.

What should I do if my new flashlight fogs up?

Causes of fogging:

• The seal is damaged (solution: replace or coat with sealant).
• Crack in the housing (solution: only replace the flashlight).
• The drainage hole at the bottom of the lamp is clogged (solution: clean it with a needle).

If the fogging is temporary (disappears 10–15 minutes after turning on the lamps), this is normal - the moisture evaporates due to heating. But if condensation persists constantly, look for the cause in tightness.

Is it possible to paint the lantern a different color (for example, smoky)?

Technically yes, but there are some nuances:

• 🔴 Red color the brake light and clearance must remain unchanged (requirement of GOST R 41.48-2004).
• 🟡 The turn signal can be tinted in yellow or orange, but not in other colors.
• ⚪ The reverse can be tinted, but no more than 30% (otherwise visibility will decrease).

For tinting use vinyl film (not paint!) so as not to interfere with light transmission. Before applying the sticker, check the legality of the traffic police website.

Which flashlight is better - the original or the Hella?

Comparison:

Criterion	Original Nissan	Hella
Luminous output	Standard	20% brighter
Tightness	High	High (uses double seal)
Service life	5–7 years	7–10 years
Price	8,000–12,000 rub.	6,500–7,500 rub.

Conclusion: if the budget allows, Hella — the optimal choice in terms of price/quality ratio. The original should only be taken if there is a guarantee or if 100% compatibility with the wiring is important.