Clean air in the cabin Nissan Almera - not a luxury, but a necessity for the health of the driver and passengers. The cabin filter, an unnoticed but critical element, is responsible for trapping dust, pollen, exhaust fumes and even bacteria. However, many owners Almera G15 or Almera Classic (G11) they forget about its existence until they begin to notice a persistent smell of mold, deterioration in the performance of the stove, or constant fogging of the glass.
In this article we will look at everything you need to know about cabin filters for Nissan Almera: from choosing between coal and conventional options to step-by-step replacement instructions with photos and videos. We will pay special attention to typical mistakes that reduce the service life of the filter by 2-3 times, and we will also reveal the secrets of saving without loss of quality. If you have never changed the filter yourself, don’t worry: Almera this procedure takes no more than 15 minutes and does not require special tools.
Why is a cabin filter needed in Nissan Almera and when to change it
Cabin filter in Nissan Almera performs three key functions:
- 🛡️ Health protection - traps up to 95% of harmful particles (PM2.5, pollen, fungal spores), which can cause allergies or exacerbation of asthma.
- 🚗 Saving vehicle systems — prevents dirt from entering the heater radiator and air conditioner, extending their service life.
- 🌫️ Comfort — eliminates unpleasant odors (in carbon filters) and reduces glass fogging due to improved air circulation.
The manufacturer recommends changing the filter every 15,000 km or once a year, but in practice the timing depends on the operating conditions. For example, if you often drive on dusty roads or sit in traffic jams next to trucks, the interval will be reduced to 8–10 thousand km. The following signals indicate that it is time to replace the filter:
- 🌬️ Weak air flow from the deflectors even at maximum fan speed.
- 🤧 Constant smell of dampness or mold when the air blower is turned on.
- 🔍 Visible dirt or leaves in the air ducts (can be checked with a flashlight).
⚠️ Attention! Failure to replace the filter will lead to the air conditioner evaporator becoming overgrown with mold. B Almera G15 with climate control this is fraught with expensive repairs (from 15,000 ₽).
Interesting fact: in Nissan Almera Classic (G11) the filter is located differently than in Almera G15, and replacing it takes 5 minutes longer. More on this in the instructions section.
- Every 10,000 km
- Once a year
- Only when the smell appears
- Never changed
- Another option
Types of cabin filters for Nissan Almera: which one to choose
There are three types of filters on the market for Almera, and their choice depends on your priorities:
| Filter type | Benefits | Disadvantages | Service life | Price (₽) |
|---|---|---|---|---|
| Normal (dust) | Low price, suitable for clean regions | Does not retain gases or odors | 10–15 thousand km | 300–800 |
| Coal | Absorbs harmful gases (NOx, SO₂), removes odors | More expensive, clogs faster in urban environments | 8–12 thousand km | 800–1 500 |
| Electrostatic | Highly effective against fine dust and bacteria | Requires regular cleaning, high price | 15–20 thousand km | 1 500–3 000 |
| Hybrid (coal + HEPA) | Maximum protection against all types of contaminants | Most expensive, may impair airflow | 12–18 thousand km | 2 000–4 000 |
For most owners Almera the optimal choice would be mid-price carbon filter (For example, Mann CU 2939 or Bosch 1 987 429 666). It provides a balance between price and efficiency, especially relevant for urban use. If you live in an ecologically clean region, you can limit yourself to a regular dust filter (for example, Framm CF10134).
Important: starting from 2019, the Nissan Almera G15 has been equipped with filters with an increased filtration area (part number 27277-JM00A). Old analogues (for example, 27277-4M000) will not physically fit!
Original vs analogs: comparison of cabin filters for Almera
Original filter from Nissan (article 27277-JM00A for Almera G15 or 27277-4M000 for G11) will cost 1,200–1,800 rubles. But there are dozens of analogues on the market that are not inferior in quality, and sometimes even surpass the original. Let's look at the best options:
- 🏆 Best in terms of price/quality ratio: Mann CU 2939 (coal, ~900 ₽). It features high density material and a reliable frame.
- 💰 Budget option: Framm CF10134 (dust, ~400 ₽). Suitable for infrequent use or clean regions.
- 🛡️ Maximum protection: Bosch 1 987 429 666 (charcoal + antibacterial coating, ~1,500 ₽). Recommended for allergy sufferers.
- 🔄 Long service life: Mahle LA 923 (coal, ~1,100 ₽). Has an increased filtration area.
When choosing an analogue, pay attention to:
- 📏 Dimensions: The filter must fit exactly into the seat. For Almera G15 standard dimensions - 200x200x25 mm.
- 🔧 Frame quality: the plastic should not crumble, and the seals should allow air to bypass the filter element.
- 📝 Certification: look for markings
ISO/TS 16949orECE R143.
⚠️ Attention! Cheap filters without a brand (for example, from AliExpress for 200 ₽) are often made of low-quality material that disintegrates after 3-4 months. Savings of 500 ₽ can result in replacing the air conditioner evaporator by 20,000 ₽.
Before purchasing, check the filter for light transmission: a high-quality carbon filter should not allow light to pass through. If light is visible, it is a fake with a minimal layer of coal.
Step-by-step instructions for replacing the cabin filter on a Nissan Almera G15
Replacing the filter with Nissan Almera G15 (2019–2023) takes no more than 10 minutes. You will need:
- 🔧 Flat screwdriver (or plastic pick).
- 🧹 Vacuum cleaner or damp cloth to clean the case.
- 📦 New filter (check the article number!).
Step 1. Preparation
Open the glove compartment and remove all items from it. Then press the side latches of the glove compartment and lower it down until it stops. B Almera G15 The glove compartment is mounted on plastic guides - do not use excessive force so as not to break them.
Step 2: Access the filter
Behind the glove compartment you will see a plastic filter cover (black or gray). It is secured with two latches. Carefully pry it with a screwdriver on the right side and pull it towards you. The cover should come off without resistance.
Step 3: Removing the old filter
Pull the old filter out towards you. Pay attention to its condition: if it is deformed or mold is visible on it, it is recommended to treat the filter housing with an antiseptic (for example, Liqui Moly Klima-Anlagen-Reiniger).
Step 4: Install a new filter
Before installing a new filter, check the air flow direction (indicated by the arrow on the frame). B Almera G15 air moves from top to bottom. Insert the filter all the way, then close the lid and return the glove compartment to its place.
Check the article number of the new filter|Clean the housing from dust and leaves|Make sure there is no moisture in the air ducts|Check the direction of the arrow on the filter-->
For Nissan Almera Classic (G11) The process is a little more complicated:
- Remove the glove compartment by unscrewing the 4 screws with a Phillips screwdriver.
- Disconnect the glove compartment light connector (if equipped).
- The filter cover is located to the left of the center console. It is secured with 3 latches.
What to do if the filter does not fit into the groove?
If the new filter does not fit into place, check:
1) The article number is correct (you may have purchased a filter for a different model).
2) The presence of foreign objects in the housing (leaves, debris).
3) Deformation of the filter frame (sometimes light compression on the sides helps).
If the problem remains, compare the old and new filters visually: perhaps the new one has a non-standard shape.
Typical replacement mistakes and how to avoid them
Even such a simple procedure as replacing the cabin filter is fraught with pitfalls. Here are the most common mistakes owners make Nissan Almera:
- 🔄 Incorrect installation direction. The arrow on the filter should point down (in the direction of air movement). If you change the direction, the filter will clog 2 times faster.
- 🧹 Ignoring case cleaning. Dust and leaves left in the duct will immediately clog the new filter. Always vacuum the cabinet before installation.
- 💧 Installing a filter in a wet housing. If condensation has accumulated in the air duct (often happens after rain), the new filter will become moldy within a week. Before replacing, dry the system by turning on the airflow for a maximum of 5–10 minutes.
- 🔧 Damage to glove compartment latches. B Almera G15 The plastic glove compartment guides are fragile. If you forcefully pull the glove compartment down, they break (repair cost - from 3,000 ₽).
Another common problem is buying a fake. There are many counterfeit branded filters on the market Mann or Bosch. You can distinguish them by:
- 📦 Uneven or blurry printing on packaging.
- 🔍 No hologram or barcode.
- 🧱 A fragile frame that breaks when pressed lightly.
If after replacing the filter the smell of mold remains in the cabin, the problem lies in the air conditioner evaporator. In this case, only professional cleaning with steam or special compounds (for example, Wynn's Airco Cleaner).
How to extend the life of the cabin filter in Nissan Almera
The average filter life is 10–15 thousand km, but with proper care it can be increased by 30–40%. Here are proven methods:
- 🌿 Regular cleaning of the housing. Once every 3 months, remove the filter and vacuum the housing. This will prevent dirt from accumulating.
- 🚗 Correct use of air conditioner. Always turn off the air conditioner 1-2 minutes before arriving at your destination. This will dry out the system and prevent mold from forming.
- 🌡️ Humidity control. If the windows in the car often fog up, use
recirculation mode(circular arrow button) or defogger (Sonax Anti-Fog). - 🛠️ Treatment with antibacterial spray. Once every six months, spray the air ducts with a product such as Liqui Moly Klima-Anlagen-Reiniger. This kills bacteria and eliminates odors.
If you live in a region with high humidity (for example, St. Petersburg or Sochi), it is recommended:
- Install filters with antibacterial impregnation (For example, Corteco 80001774).
- Once a month, turn on the air conditioner for 10 minutes, even in winter (to dry the system).
- Use silica gel moisture absorbers in the showroom (cost ~200 ₽, sold in shoe stores).
An interesting life hack: if the filter becomes clogged ahead of time (for example, after a trip along a dusty road), you can clean with a vacuum cleaner. To do this:
- Carefully vacuum both sides of the filter (without touching the frame).
- Rinse it under a gentle stream of water (no detergent!).
- Dry in the sun or with a hairdryer (cold air).
This method will extend the life of the filter by 2–3 thousand km, but remember: the carbon layer loses its properties after washing.
Where to buy a cabin filter for Nissan Almera: proven options
Buy a filter for Almera you can do it in four places, each of which has pros and cons:
| Place of purchase | Benefits | Disadvantages | Average price (₽) |
|---|---|---|---|
| Official dealer | Original quality guarantee, compatibility check | Highest price, sometimes out of stock | 1 500–2 000 |
| Auto stores (Avtodok, Existence) | Wide assortment, the ability to choose an analogue | Risk of running into a fake (especially in small stores) | 400–1 500 |
| Online stores (Wildberries, Ozon, Kolesa-darom) | Low prices, customer reviews, delivery | Long wait, difficulties with returns | 350–1 200 |
| Markets or Avito | You can bargain, sometimes you come across used filters in good condition | High risk of counterfeit, no guarantee | 200–800 |
Our recommendations:
- 🛒 For original filter: official dealer or verified online store (for example, Exist.ru).
- 💰 To save money: Wildberries or Ozon, but only from sellers with a rating above 4.8. Pay attention to the photo of the packaging.
- ⚡ If you need a filter urgently: large chain stores (Autodoc, AutoSpetsCenter).
Before purchasing, always check the article number with VIN number your car. For example, for Almera G15 2020 suitable with air conditioning 27277-JM00A, and for Almera Classic 2015 without climate control - 27277-4M000.
⚠️ Attention! When purchasing on Wildberries or Ozon, check the country of origin. Filters made in China (not to be confused with assembled in China for brands Mann or Bosch), often turn out to be fakes. Give preference to goods from Germany, Japan or Korea.
FAQ: Frequently asked questions about cabin filters Nissan Almera
Is it possible to drive without a cabin filter?
Technically yes, but this will lead to:
- Rapid wear of the stove fan (due to dirt).
- Contamination of the air conditioner evaporator (risk of mold).
- Ingress of harmful particles into the lungs of the driver and passengers.
B Almera G15 without a filter, a climate control error may also occur (P0532 - low air flow).
Which filter is better - carbon or regular?
The choice depends on the operating conditions:
- Coal needed if you drive around the city with heavy traffic (retains exhaust gases) or suffer from allergies.
- Regular Suitable for rural areas or if you rarely use air conditioning.
For Almera With climate control, a carbon filter is preferable - it protects the system from clogging.
What happens if you don’t change the filter for 2-3 years?
The consequences depend on the model:
- B Almera G15 a clogged filter leads to fan resistor overheating (replacement cost - ~5,000 ₽).
- B Almera Classic (G11) The air conditioner evaporator often suffers - cleaning it will cost 8-12 thousand rubles.
In addition, a persistent smell of rot will appear in the cabin, which cannot be eliminated without completely cleaning the system.
Can the filter be washed and reused?
A regular dust filter can be washed with water and dried, but:
- The carbon layer loses its properties after washing.
- The frame may become deformed when drying.
- Efficiency drops by 30–40% even after careful cleaning.
It’s better to spend 500 ₽ on a new filter than to risk your health.
Why does the cabin smell like burning after replacing the filter?
This is a sign:
- Oil gets on the filter (check the oil level in the engine).
- Overheating of the stove fan (you need to check the fuse
F30in the block). - Poor filter quality (cheap analogues sometimes have a chemical smell).
If the smell does not disappear after 1–2 days, contact a service center to diagnose the ventilation system.