Headlights <em>Nissan Teana J31</em> restyling (2014–2019): how to choose, change and upgrade

Nissan Teana J31 restyled version (2014–2019) - a car that combines the comfort of a business sedan and the reliability of Japanese engineering. One of the key elements of its appearance and safety are the **headlights**, which not only form the appearance of the car, but are also responsible for the quality of road illumination. Over time, the optics dim, the lamps burn out, and the plastic becomes cloudy - and the owner is faced with the question: what to do?

In this article we will look at **all aspects of working with headlights Teana J31 restyling**: from the selection of original and non-original spare parts to step-by-step replacement of lamps and complete modernization of optics. We will pay special attention to **typical problems** (for example, fogging or incorrect xenon operation), as well as legal tuning methods that do not violate traffic regulations. If you are planning a repair or upgrade, here you will find proven solutions with articles, photos and expert advice.

Original headlights and their part numbers: what is installed on Teana J31 restyling

Restyled version Nissan Teana J31 (2014–2019) received updated headlights with a modified lens shape and light pattern. Depending on the vehicle configuration, **three types of optics** were installed:

• 🔦 Halogen headlights — basic version with lamps H7 (low/high beam) and PY21W (dimensions/turn signals). Article number of the original right headlight: 26060-JM01A, left: 26010-JM01A.
• 💡 Xenon headlights — option for top trim levels (for example, Teana 2.5 V6). Lamps used D2S and ignition blocks. Articles: right - 26060-JM00A, left - 26010-JM00A.
• 🔄 Adaptive headlights (AFS) — a rare option with rotary modules. The part numbers are the same as the xenon ones, but require an additional control unit.

Important: headlights for pre-styling Teana J31 (2008–2013) don't fit - The shape of the fasteners and connection connectors have changed. When purchasing, check the markings on the body: restyled headlights have a suffix JM01A or JM00A.

Cost of original headlights for 2026:

Headlight type	Article (right)	Price, rub.	Notes
Halogen	26060-JM01A	18 000–22 000	Without lamps and turn signals
Xenon	26060-JM00A	25 000–30 000	Includes lenses, no ignition blocks
Adaptive (AFS)	26060-JM00A	35 000–40 000	Requires control unit 28510-JM00A

⚠️ Attention: When buying used headlights, check the integrity reflector - on restyled ones Teana J31 Its detachment due to overheating is common. Also inspect the connectors: oxidized contacts can cause the light to flicker.

Analogues and non-original headlights: what to choose instead of the original

Original headlights from Nissan They are of high quality, but their price often seems overpriced. There are worthy analogues on the market, which can be divided into **three categories**:

• 🏭 OEM suppliers - headlights from the same factories that supply spare parts to the assembly line Nissan, but under different brands. For example:
  • Stanley (items start with ST-...) - identical to the original, but 20–30% cheaper.
  • Koito - a Japanese manufacturer that supplied optics for Teana for export. Marking: KO-26060-JM01A.
• 🔧 High-quality analogues — brands specializing in optics for Japanese cars:
  • TYC (article 20-6500-00-1 for halogen) - good price/quality ratio, but there may be problems with tightness.
  • Depo - a budget option, but there are often defects in the casting of the case.
• ⚡ Headlights with LED modules — non-original tuning solutions. Popular kits from Morimoto or Spec-D, but require modifications to the wiring.

When choosing an analogue, pay attention to:

1. Compatible with corrector system (on restyled Teana J31 an electric motor is used, which may not be suitable for cheap headlights).
2. Availability ECE certificate — without it, the headlights will not pass inspection.
3. Material diffuser: Glass is preferable to plastic (less prone to clouding).

⚠️ Attention: Non-original headlights with Chinese LED modules often blind oncoming drivers due to incorrect focus. If you are planning such an upgrade, be sure to adjust the lights on the stand.

Replacing headlight bulbs Teana J31 restyling: step-by-step instructions

Replacing lamps with Nissan Teana J31 restyling does not require special tools, but has nuances depending on the type of optics. Let's look at the process using the example of **halogen headlights** (the most common option).

Required tools:

• 🔧 A set of socket wrenches (for removing the bumper when replacing the entire headlight).
• 🧤 Lint-free gloves (you cannot touch the bulb of a halogen lamp with bare hands!).
• 🔦 Flashlight or head light (lighting the engine compartment).
• 🔧 Flat blade screwdriver (for removing clips).

Procedure for replacing the low/high beam lamp (H7):

1. Open the hood and remove plastic cover from the back of the headlight (turn counterclockwise).
2. Disconnect power connector from the lamp by pressing the latch.
3. Remove rubber boot (it protects against moisture).
4. Click on spring retainer lamp and remove it from the hooks.
5. Remove the old lamp and install a new one, without touching the flask.
6. Reassemble everything in reverse order. Check the light operation before installing the boot!

For replacement side/turn signal lamps (PY21W):

1. Turn the cartridge counterclockwise and remove it.
2. Press the lamp and rotate it 90° counterclockwise.
3. Install a new lamp (eg Osram 2825 or Philips 12362PRB2).

⚠️ Attention: On restyled Teana J31 with xenon lamp replacement D2S requires reprogramming the ignition unit (otherwise there will be an error Check Headlight on the dashboard). This requires a scanner Consult-III Plus or its equivalent.

Disconnect the negative terminal of the battery|Check the compatibility of the lamps in the catalogue|Wear gloves|Prepare a flashlight for illumination-->

Problems with headlights Teana J31 restyling: fogging, flickering, errors

Owners Nissan Teana J31 restyling often encounters typical optical malfunctions. Let's look at the most common ones and how to eliminate them.

1. Foggy headlights

Reasons:

• 💧 Violation of tightness — cracks in the housing or wear of the rubber seal.
• 🔥 Clogged ventilation valves (located at the bottom of the headlight).
• 🚿 Water ingress during washing under high pressure.

Solution:

1. Remove the headlight and check the integrity sealing gum (article 26065-JM00A).
2. Clean the ventilation holes with a thin wire.
3. Use silica gel (bags of balls) inside the headlight to absorb moisture.

2. Flickering or dim light

Possible reasons:

• 🔋 Oxidation of contacts in the headlight connectors or fuse box (check the fuse F37 (10A) in the mounting block).
• 💡 Lamp wear — halogen lamps lose up to 30% of their brightness after 2–3 years of operation.
• 🔧 Malfunction of the ignition unit (for xenon). Typical error: B260A (lamp circuit break).

3. Error Check Headlight on the dashboard

Most often occurs after replacing lamps or headlights. Reasons:

• ⚡ Incompatibility ignition unit with car firmware (relevant for xenon).
• 🔌 Absence load resistor when installing LED lamps.
• 📶 Malfunction light control module (article 28510-4M000).

⚠️ Attention: If after replacing the lamps H7 an error appears on the LED, install canbus resistors (For example, Narva 48916) parallel to the chain. They simulate the load of a halogen lamp.

How to reset Check Headlight error without a scanner?

1. Turn off the ignition.

2. Press and hold the daily mileage reset button (on the dashboard).

3. Turn the key to the ON position (do not start the engine).

4. Hold the button for 10 seconds until the error disappears.

Does not work on all software versions!

Headlight tuning Teana J31 restyling: LED, angels, tinting

Modernization of optics is a popular area of tuning Nissan Teana J31. Let's consider legal and effective upgrade methods that will not lead to problems with the traffic police.

1. Installing LED lamps instead of halogen

For restyled Teana J31 Suitable LED lamps with socket H7, but it is important to choose models with the right light beam. Recommended options:

• 🔦 Philips X-tremeUltinon — brightness 6000K, certified for public roads.
• 💡 Osram LEDriving HL — luminous flux close to halogen (150% brightness), no glare.

⚠️ Attention: Cheap LED lamps (for example, with AliExpress) often have incorrect focus, which blinds oncoming drivers. Check the certificate before purchasing ECE R112.

2. Installation of "angel eyes"

For restyled headlights Teana J31 fit ring diameter 80–85 mm (depending on the type of optics). Popular options:

• 🔘 Morimoto XB LED — flexible tapes with a uniform glow.
• 🔘 Oracle Lighting — rings with changeable color (controlled from a smartphone).

Installation required disassembling headlights (heat in oven to 100°C to separate glass). If you are not confident in your abilities, entrust the work to professionals.

3. Tinting or painting headlights

Legal options:

• 🎨 Film "light smoke" (transmits ≥70% of light) - applied to the outside of the diffuser.
• 🖌️ Varnish "anti-rain" (For example, Soft99 Glass Coating) - gives a slight yellowish tint and protects against scratches.

❌ Prohibited: Full tinting with black film or paint - a fine of 500 rubles. (Article 12.5 of the Administrative Code).

4. Replacing the diffuser with the “euro” version

For restyled Teana J31 you can install headlights from Nissan Maxima A35 (article 26060-4M01A) - they have a more aggressive design and bi-xenon as standard. However, you will need:

• Modification of fasteners (drilling new holes).
• Replacing connection connectors.
• Setting up the corrector (otherwise the light will shine upward).

Headlight repair Teana J31: polishing, reflector restoration, sealing

Over time the headlights Nissan Teana J31 restyling loses transparency, and reflectors fade. Let's look at restoration methods without completely replacing the optics.

1. Polishing the diffuser

Cloudy plastic can be polished at home. You will need:

• 🧴 Abrasive paste (for example, 3M 09374 for plastic).
• 🔧 Polishing machine or drill with nozzle.
• 🧴 Protective varnish (for example, Delta Kits Clear Coat).

Step by step instructions:

1. Remove the headlight and apply masking tape around the paint.
2. Treat the diffuser sandpaper P800→P1200→P2000 (with water!).
3. Apply abrasive paste and polish for 5-7 minutes.
4. Coat with varnish to protect against UV rays.

2. Restoring the reflector

If the reflector has faded or begun to peel off, it can be restored:

• 🖌️ Chrome paint (For example, Spaz Staz Chrome) - applied in 3-4 layers after degreasing.
• 🔧 Replacing the reflector - for halogen headlights a reflector from Nissan Altima L32 (article 26100-4M000).

3. Sealing the headlight

If the headlight fogs up due to cracks, use:

• 🔥 Glass sealant (For example, Abro WS-904) - applied along the seam between the body and the glass.
• 🧲 Epoxy resin - for sealing small cracks.

After sealing necessarily check the operation of the ventilation valves!

⚠️ Attention: When disassembling the headlight do not heat it above 120°C - this will lead to deformation of the plastic case and damage to the reflector.

Comparison of halogen, xenon and LED: which is better for Teana J31 restyling

The choice of lamp type depends on your priorities: brightness, durability or regulatory standards. Let's compare options for the restyled Teana J31:

Parameter	Halogen (H7)	Xenon (D2S)	LED (H7)
Brightness, lm	1500–1600	3000–3200	2000–2500
Color temperature, K	3200–3500	4300–6000	5000–6500
Service life, h	400–600	2000–3000	30 000–50 000
Energy consumption, W	55	35	15–25
Cost of the set, rub.	800–1500	5000–10 000	3000–8000
Legality (traffic rules)	✅ Yes	✅ Yes (if standard option)	⚠️ Conditional (certificate required)

Recommendations for selection:

• 🚗 For the city and occasional trips: halogen Osram Night Breaker - best price/quality ratio.
• 🌃 For the track and bad weather: xenon Philips D2S (4300K) - maximum light range.
• 💡 For durability and modernity: LED Philips X-tremeUltinon, but only with a certificate.

⚠️ Attention: Installing xenon in halogen headlights prohibited (fine 3000 rubles + confiscation of equipment). For legal installation, the headlights must be completely replaced with certified xenon ones.

FAQ: Frequently asked questions about headlights Nissan Teana J31 restyling

Is it possible to install pre-restyling headlights on a restyled one? Teana J31?

No, this is impossible without serious modifications. Pre-restyling headlights (2008–2013) have a different housing, mounts and connection connectors. The only option is to completely replace the front bumper and radiator grille, which is not economically feasible.

What kind of lamps H7 give the whitest light, but do not blind oncoming people?

The best choice is lamps with color temperature 4200–4500K and certificate ECE. We recommend:

• Philips WhiteVision (4300K) - brightness +60%, light close to xenon.
• Osram Cool Blue Intense (4200K) - cool white light without glare.

Avoid lamps with temperatures above 5000K - they illuminate the road worse in rain and fog.

How to resolve the error B260A after replacing the xenon lamp?

Error B260A (lamp circuit break) occurs due to incompatibility of the ignition unit with the vehicle firmware. Solutions:

1. Install original ignition unit (article 28510-4M000).
2. Flash the light control unit (BCM) through Consult-III Plus.
3. Use decoy (resistor 6 Ohm, 50 W) in the break in the lamp power wire.

The most reliable solution is the first point.

What to do if after washing the headlight is half filled with water?

Complete the following steps immediately:

1. Remove the headlight and drain the water by tilting it down.
2. Dry hairdryer (temperature no higher than 60°C!) for 15–20 minutes.
3. Check the sealing rubber for tightness and replace it if necessary (part no. 26065-JM00A).
4. Apply caulk to the body seams.

If water gets on the reflector, it may lose its reflective properties, in which case it will need to be replaced or restored with chrome paint.

Is it possible to install bi-xenon in halogen headlights? Teana J31?

Technically possible, but illegally. To do this you will need:

• Install lenses (For example, Morimoto Mini H1) instead of standard reflectors.
• Connect ignition blocks and relay.
• Adjust the light at the stand so as not to blind oncoming people.

However, such a modification will not pass inspection, since halogen headlights are not certified for xenon. Risk—fine 3,000 rubles. and an order to return everything to its original state.