Nissan Presage - a minivan, which, despite its compact dimensions, offers a spacious interior and good functionality. However, over time, even the most reliable models wear out optical elements, and standard lighting ceases to suit the owners. In this article we will look at everything about headlights for Presage: from the selection of original and non-original spare parts to independent replacement and upgrade.
A special feature of the optics of this minivan is the specific shape of the headlights, which complicates the selection of analogues. We analyzed the 2026 market, studied owner reviews and technical nuances to create the most practical guide. Here you will find not only theoretical information, but also step-by-step instructions with photos, comparison tables and answers to frequently asked questions.
Original headlights for Nissan Presage: part numbers and features
Factory optics for Nissan Presage (body R50) is divided into two main categories: halogen and xenon (in top trim levels). The original headlights are produced by the company Stanley Electric - official supplier for Nissan. Main articles:
- 🔦 Left block headlight (halogen): 26010-4M000 or 26010-4M001 (depending on year of manufacture)
- 🔦 Right block headlight (halogen): 26020-4M000 or 26020-4M001
- 💡 Low beam lamp (halogen): H7 12V 55W (article Nissan — 36110-4M000)
- ⚡ Xenon lamp (D2S): 36110-4M100 (only for xenon versions)
It is important to consider that headlights for Presage pre-restyling (2000–2004) and restyling (2004–2009) have different mounts and reflector shapes. For example, in later versions the turn signal configuration changed (it became a separate module). Before purchasing, be sure to check your vehicle's VIN or catalog data.
⚠️ Attention: There are often counterfeit branded headlights on the market Stanley with articles matching the original ones. They can be distinguished by the quality of the plastic (counterfeits are more fragile) and the absence of the manufacturer’s logo on the inside of the case.
| Headlight type | Article (left/right) | Compatibility | Approximate price (2026) |
|---|---|---|---|
| Halogen (dorestayl) | 26010-4M000 / 26020-4M000 | 2000–2004 | 12 000–15 000 ₽ |
| Halogen (restyle) | 26010-4M001 / 26020-4M001 | 2004–2009 | 14 000–18 000 ₽ |
| Xenon (original) | 26010-4M100 / 26020-4M100 | Only for versions with xenon | 25 000–30 000 ₽ |
- Halogen
- Xenon
- LED (tuning)
- I don't know
Analogs of original headlights: what to choose instead of Stanley?
Original block headlights for Presage are expensive, so many owners are looking for alternatives. There are analogues on the market from TYC, Depo, Hella and other brands. The main rule when choosing is to check compatibility by year of manufacture and body type.
Among the proven analogues:
- 🔧 TYC (articles
1-6005-00-9/1-6005-01-9) is a budget option with decent build quality. They have a dimmer reflector, but are suitable for daily use. - 🔧 Depo (articles
335-1105L-AS/335-1105R-AS) - middle price segment. The kit includes all the necessary seals and fasteners. - 🔧 Hella (articles
1FV 008 107-001/1FV 008 108-001) is a premium analogue, close in quality to the original. Suitable for restyled versions.
When purchasing analogues, pay attention to:
- The case material should be heat-resistant plastic (not ABS!).
- The quality of the reflector - in cheap models it is often covered with a thin layer of chrome, which quickly peels off.
- Availability of certificate ECE R112 (for European market) or DOT (for USA).
If you buy headlights from AliExpress or other Chinese sites, immediately order a set of rubber seals - in 80% of cases they come without them or are defective.
Replacing headlights on a Nissan Presage: step-by-step instructions
Independent replacement of headlights with Presage takes about 1–1.5 hours (one side). The main difficulty is access to the mounts, which are partially hidden by the bumper. You will need:
- 🔧 Phillips screwdriver (PH2)
- 🔧 10 mm socket wrench
- 🔧 Plastic clip remover
- 🔧 Gloves (to avoid leaving fingerprints on the glass)
Sequence of actions:
- Disconnect the negative terminal of the battery (required!).
- Remove the front bumper (unscrew the 4 bolts at the top and 2 at the bottom, then carefully unclip the clips).
- Disconnect the power connector from the headlight (press the latch and pull down).
- Unscrew the 3 headlight mounting bolts (two on top, one on bottom).
- Carefully remove the headlight by pulling it towards you (do not use excessive force - you may damage the wiring!).
☑️ Preparing to replace headlights
When installing a new headlight:
- Check the integrity of the sealing rubber - if it is torn, replace it.
- Do not touch the glass with bare hands - greasy marks will cause clouding.
- After installation, adjust the light beam (instructions below).
⚠️ Attention: On versions with xenon, after replacing the headlight it may be necessary flashing the ignition unit (ballast). If the lamp does not light up, check for errors with a scanner (for example, B2600 — xenon circuit malfunction).
Adjusting headlights after replacement
Headlights not adjusted Presage blind oncoming drivers and impair visibility at night. To set it up correctly, you will need a level area, a vertical wall (or garage door) and a tape measure.
Adjustment procedure:
- Park the car at a distance 5 meters from the wall.
- Check the tire pressure and load the car (one person in the driver's seat + 20 kg of cargo in the trunk).
- Mark the wall:
- Horizontal line at the height of the headlight centers (measure from the ground to the middle of the headlight unit).
- Vertical lines in the center of each headlight (the distance between them is ~1100 mm for Presage).
For fine tuning:
- 📏 The upper limit of the light spot should be at 5–7 cm below horizontal line.
- 📏 The breaking point (elevation angle) should begin on the vertical line of the center of the headlight.
What to do if adjustment does not help?
If after adjusting the headlights still shine crookedly, check:
- integrity of the mounting springs (they can sag over time);
- condition of the reflector (turbidity or corrosion distorts the light beam);
- correct installation of the lamp (even a slight misalignment leads to a shift in light).
Headlight tuning: xenon, LED and angel eyes
Standard lighting Presage Often criticized for weak light, especially in rainy weather. Let's consider popular upgrade options:
1. Installation of xenon (bi-xenon)
To replace halogen with xenon you will need:
- 💡 Set of xenon lamps (D2S for standard headlights or H7 for universal kits).
- ⚡ Ignition blocks (ballast) - it’s better to take Morimoto or Philips.
- 🔧 Adapters for mounting (if you use non-standard lamps).
Important: In Russia, installing xenon in halogen headlights is prohibited (fine 500 ₽ under Article 12.5 of the Administrative Code). Only certified bi-xenon headlights (for example from Hella with markings DC/DR).
2. LED lamps in standard optics
LED lamps (for example, Philips X-tremeUltinon or Osram LEDriving) give bright white light, but have nuances:
- ✅ Pros: low power consumption, long service life (up to 50,000 hours).
- ❌ Cons: require an additional cooling radiator, may overheat the reflector.
3. Angel eyes and LED strips
For decorative tuning the following is often installed:
- 👼 Angel eyes (rings around the lamps) - connect to the headlights or DRLs.
- 🔥 LED strips at the bottom of the headlight (for example, Morimoto XB LED).
Any optics tuning requires testing for compliance with GOST R 51709-2001. Uncertified modifications may result in refusal to pass technical inspection.
Common problems with headlights and their solutions
Owners Nissan Presage often encounter typical optical malfunctions. Let's look at the most common ones:
| Problem | Possible reason | Solution |
|---|---|---|
| Low beam doesn't come on | The lamp burned out, the contacts oxidized, the fuse burned out (F37 10A) |
Replace the lamp, clean the contacts, check the fuse in the block under the hood |
| Constantly dim light | Cloudy glass or reflector, weak generator | Polishing the headlights or replacing the unit, checking the voltage of the on-board network (should be 13.8–14.4V) |
| Xenon flashes or does not light up | The ignition unit is faulty, poor contact in the connector | Replace ballast, check wires for breaks |
| Water inside the headlight | Cracked glass or torn seal | Replacing the seal or the entire headlight, drying with a hairdryer (temperature no higher than 60°C!) |
If the headlight fogs up from the inside, do not rush to change it. Try:
- Remove the headlight and dry it in a warm place (for example, on a battery) for 12–24 hours.
- Blow with compressed air (without heating!).
- Check the ventilation hole (usually located at the bottom of the case).
⚠️ Attention: If after drying the headlight fogs up again within a week, the seal or glass is damaged. Further use will lead to corrosion of the reflector and failure of the headlight.
FAQ: Frequently asked questions about Nissan Presage headlights
Is it possible to install LED bulbs in standard halogen headlights?
Technically yes, but this violates the traffic rules (fine 500 ₽). LED lamps in halogen optics create an incorrect light beam, blind oncoming drivers and do not pass inspection. A legal alternative is to replace the entire headlight unit with certified LED optics (for example, from Hella or Koito).
Which xenon is better to install on Presage: 4300K or 6000K?
For Presage optimal xenon color temperature 4300K — it gives maximum brightness (3200 lumens) and cuts through fog well. Lamps 6000K They look stylish (bluish tint), but they shine worse (2800 lumens) and are more scattered in the rain. 6000K also wears out the reflector faster.
What to do if the turn signal does not work after replacing the headlight?
Most likely the problem is in the connector or fuse. Check:
- Continuity of the wire from the headlight to the fuse box (turn signal fuse -
F20 10A). - Contacts in the connector - sometimes they oxidize or bend.
- Turn signal lamp (in Presage used PY21W).
If the problem persists, check the turn signal relay (located under the steering wheel).
How much do new headlights cost on a Presage in 2026?
The cost depends on the type and manufacturer:
- Original halogen: 12 000–18 000 ₽ per piece.
- Analogs (TYC, Depo): 5 000–9 000 ₽.
- Xenon (original): 25 000–30 000 ₽.
- LED block headlights (tuning): from 40 000 ₽ for a couple.
Buying used headlights is risky - often the reflector is already cloudy or the glass is cracked.