Headlights Nissan Murano Z50 (2008-2014) is more than just a lighting element, but a key component of the crossover's safety and style. Over time, the optical units fade, the lamps burn out, and the plastic becomes cloudy, which reduces visibility on the road and spoils the appearance of the car. In this article we will look at everything you need to know about headlights. Murano Z50: from choosing original and non-original parts to step-by-step lamp replacement, crack repair and tuning for LEDs or xenon.

A special feature of this generation of optics is a complex design with a separate low/high beam unit and turn signals integrated into the body. This complicates repairs, but opens up opportunities for modernization. We analyzed owner reviews, technical manuals and price lists of auto repair shops to collect up-to-date information. If you encounter condensation inside the headlight, burnt out H7 lamp or want to install angel eyes — here you will find answers with photos, diagrams and video instructions.

Headlight design Nissan Murano Z50: device and features

Optics Murano Z50 has a modular structure, where each element performs its own function:

  • 🔦 Low beam: lamp H7 (55 W) in a separate reflector with lens. The original blocks are equipped with a tilt angle corrector.
  • 🌃 High beam: lamp H1 (55 W) at the top of the case. Some modifications use bi-xenon (optional).
  • 🔄 Turn signals: lamps PY21W (orange) or colorless with an orange diffuser.
  • 💡 Dimensions: lamp W5W (5 W) at the bottom of the headlight.

The headlight housing is made of polycarbonate with a protective coating, but over time this is degraded by UV rays, leading to clouding. Inside the block there are ventilation valves, which often become clogged with dirt, causing condensation is the main problem in optics Murano Z50. The original headlights have catalog numbers 26010-4M000 (right) and 26010-4M001 (left).

It is important to take into account that in the restyled versions (2011–2014), the shape of the high beam diffuser has changed, so the headlights are not interchangeable with the pre-restyle (2008–2010). Also in top trim levels were installed adaptive headlights with automatic adjustment of the light beam, which complicates their repair.

📊 What headlights are installed on your Murano Z50?
  • Original halogen
  • Xenon (standard or tuning)
  • LED
  • I don't know

Signs of a problem: when is it time to replace or repair your headlight?

There are several “symptoms” that indicate problems with the optics:

  • 💨 Fogging inside: If condensation does not disappear after 30–60 minutes of operation of the headlight, then the seal is broken.
  • 🔦 Dim light: H7/H1 bulbs last 2-4 years but may burn out sooner due to power surges.
  • 🔍 Cloudy diffuser: Over time, the plastic turns yellow, which reduces light transmission by 30–50%.
  • 🚨 Error on the dashboard: code B2601 (low beam faulty) or B2602 (high beam).

The most dangerous problem is cracks in glass. They appear due to impacts from stones or careless pressure washing. Even a small crack can lead to moisture ingress and corrosion of the reflector. In this case, repairs are pointless - the headlight needs to be replaced.

⚠️ Attention: If the headlight still does not work after replacing the bulb, check fuse F35 (10A) in the mounting block under the hood. It is responsible for the low beam circuit and often burns out if there is a short circuit.
Malfunction Reason Solution Cost (₽)
Condensation inside the headlight Ventilation valves are clogged or there is a crack in the housing Cleaning valves or sealing cracks 500–2000
Low beam doesn't come on H7 lamp or fuse has blown Replacing the lamp + checking fuse F35 300–1500
Cloudy diffuser Oxidation of the protective layer Polishing or replacing glass 1500–5000
Error B2601 on the panel Open circuit or control unit malfunction Diagnostics with a multimeter + replacement of the unit 2000–8000

Selecting headlights for Nissan Murano Z50: original vs analogues

When purchasing a new headlight from the owners Murano Z50 there are three options:

  1. Original Nissan headlights (catalog numbers 26010-4M000/1). Pros: perfect fit, no leakage issues, compatible with automatic light control. Cons: price from 25 000 ₽ for a couple.
  2. Analogues from trusted brands:
    • 🔹 TYC (article 20-6505-00) - the best price/quality ratio (12,000–15,000 RUR per pair).
    • 🔹 Depo (article 335-1119-R/335-1119-L) is a budget option (RUB 8,000–10,000), but there may be problems with tightness.
    • 🔹 Koito — premium analogues (20,000–22,000 RUR), used on the assembly line for other brands.
  3. Headlights from disassembly. Price: 5,000–12,000 RUR per pair, but there is a risk of buying broken or leaking blocks. Before purchasing please check:
    • 🔦 Condition of the diffuser (are there any chips).
    • 💧 No condensation inside.
    • 🔧 Corrector performance (if any).

When choosing analogues, pay attention to ECE certification (marking on glass). Headlights without it may not pass inspection. Also check the package: the original blocks always include ventilation tubes and sealing rubber bands, which are often missing in cheap counterfeits.

💡

Before purchasing a disassembled headlight, ask the seller to take a video of the low/high beam operation - this will help identify hidden defects in the reflector.

Step-by-step replacement of headlight bulbs Nissan Murano Z50

Replacing lamps in Murano Z50 does not require special tools, but there are some nuances. For example, to access a lamp H7 (low beam) you need to remove the air filter, and H1 (far) — unscrew the bumper. Let's look at the process using the example of replacing a low beam lamp:

Remove the negative terminal from the battery|Unscrew the 3 bolts securing the air filter|Disconnect the power connector from the lamp|Wear gloves (do not touch the glass of the lamp with bare hands)-->

Tools: 10mm socket wrench, Phillips screwdriver, lint-free gloves.

Procedure:

  1. Open the hood and remove the negative terminal from the battery.
  2. Unscrew the 3 bolts securing the air filter housing (10mm socket wrench) and move it to the side.
  3. Press the latch on the lamp power connector H7 and disconnect it.
  4. Turn the lamp socket counterclockwise and remove it.
  5. Install a new lamp (eg Osram Night Breaker or Philips X-tremeVision), without touching the glass.
  6. Reassemble everything in reverse order. After connecting the battery, check the operation of the headlight and adjust the light using the corrector (the lever to the left of the steering wheel).

To replace the high beam lamp H1 You will need to remove the front bumper (6 x 10 bolts and 4 clips). This is more difficult, which is why many owners turn to the service. Average cost of replacing lamps at a car service center: 800–1500 ₽ for one headlight.

⚠️ Attention: Lamps H7 And H1 in Murano Z50 have different polarity. If the lamp does not light after replacement, turn it 180° in the socket. Also, do not use lamps with a power of more than 55 W - this leads to melting of the socket and fires.

Headlight repair Nissan Murano Z50: removal of condensation, polishing, sealing

If the headlight does not need to be replaced entirely, you can return it to functionality yourself. Let's look at the three most common types of repairs:

1. Elimination of condensation

The cause of fogging is clogged ventilation valves or cracks in the housing. For repair you will need:

  • 🔧 Silicone sealant ABRO or Permatex.
  • 🧴 Alcohol for degreasing.
  • 💨 Hairdryer for drying.

Instructions:

  1. Remove the headlight (unscrew the 3 10mm bolts and disconnect the connectors).
  2. Blow out the ventilation valves with compressed air or clean them with a needle.
  3. If there are cracks, fill them with sealant inside and out.
  4. Dry the headlight with a hairdryer (temperature no higher than 60°C) for 20–30 minutes.

2. Polishing a cloudy diffuser

To restore glass clarity, use a polishing kit (eg 3M 39045). Process:

  1. Cover the edges of the headlight with masking tape.
  2. Apply abrasive paste (1000-2000 grit) and polish in a circular motion.
  3. After polishing, coat the glass with a protective varnish Delta Kits.

3. Restoring the reflector

If the reflector is faded or peeling, it can be painted with special paint (for example, Dupli-Color HVP106). Pre-clean the surface of the old coating with sandpaper (400 grit) and degrease.

What to do if the headlight “leads” after repair?

If after assembly the headlight light is directed incorrectly, the reasons may be the following:

1. Incorrect installation of the lamp (the socket is skewed).

2. The corrector is damaged (check the adjustment lever under the hood).

3. The headlight housing was deformed when drying with a hairdryer (use a temperature no higher than 60°C!).

To fix the problem, adjust the light using the screws on the headlight housing (they are located on the top and side).

Headlight tuning Nissan Murano Z50: LEDs, xenon, angel eyes

Modernization of optics is a popular area of tuning Murano Z50. Let's consider three options:

1. Installation of LED lamps

LED lamps (for example, Philips Ultinon LED or Osram LEDriving HL) give bright white light (6000K), but have nuances:

  • ✅ Pros: service life up to 50,000 hours, low energy consumption.
  • ❌ Cons: require installation stabilization unit (otherwise there will be an error B2601), can blind oncoming drivers if set incorrectly.

Average cost of a set: 8 000–15 000 ₽.

2. Installation of bi-xenon

Xenon lamps (Morimoto XB or Philips Xenon>) provide better light output, but their installation requires:

  • Shopping ignition unit (from 5,000 ₽).
  • Settings autocorrector (otherwise blinding oncoming cars).
  • Legalization (amending PTS).

3. Angel Eyes and Demon Eyes

LED rings around the lamps (angel eyes) or red diodes in the turn signals (demon eyes) add style, but require:

  • Disassembling the headlight (risk of breaking the seal).
  • Connections to dimensions or a separate control unit.

Set price: from 3 000 ₽.

⚠️ Attention: Installing xenon or LED in halogen headlights without lenses prohibited by traffic rules (fine 500 ₽ under Article 12.5 of the Administrative Code). To avoid problems, use certified lamps marked ECE R112.

Where to buy spare parts for headlights Nissan Murano Z50: verified sellers and prices

Prices for optics parts Murano Z50 vary greatly depending on the supplier. The table below shows current proposals for 2026:

Detail Article Where to buy Price (₽)
Lamp H7 (Osram) 64210NBR Autodoc, Exist 400–600
Headlight right (TYC) 20-6505-00-1 AvtoAll, PartReview 6 500–7 800
Sealant for headlights (ABRO) GS-912 Any auto store 300–500
LED lamp kit (Philips) 12972BWX2 Wildberries, Ozon 7 500–9 000
Reflector (replica) — AliExpress (seller Car Light Store) 1 200–1 800

When buying at a disassembly site, pay attention to Drom or Auto.ru — they often sell headlights in good condition from broken cars. It is also useful to monitor auctions Copart, where you can find original spare parts from the USA at similar prices.

💡

Before buying a headlight from disassembly, always ask for a photo of the inside of the reflector - there is often corrosion there that is not visible from the outside.

Frequently asked questions about headlights Nissan Murano Z50

Is it possible to install xenon in halogen headlights without lenses?

Technically yes, but this violates traffic rules (fine 500 ₽). The xenon in the halogen reflector creates an incorrect light beam that blinds oncoming drivers. Legal option - installation bi-xenon lenses with washer and auto-corrector.

Why does the new one quickly burn out after replacing an H7 lamp?

Reasons:

  • 🔌 Poor contact in the connector (oxidation or burning).
  • 🔋 Voltage surges in the on-board network (check the generator).
  • 💡 Cheap lamps with a thin filament.

Solution: Clean the contacts, install a voltage stabilizer, and use premium bulbs (e.g. Narva Range Power).

How to adjust headlights after replacing bulbs?

To adjust:

  1. Place the machine on a level area 5 meters from the wall.
  2. Place marks on the wall in the center of each headlight (height - 60 cm from the ground).
  3. Rotate the adjusting screws (on the top and side of the headlight) until the light spot aligns with the marks.

For fine tuning use adjustment screen (can be made from cardboard).

What to do if water appears in the headlight?

Water inside the headlight means leakage. Urgent:

  1. Remove the headlight and drain the water (be careful not to damage the reflector).
  2. Dry with a hairdryer (temperature up to 60°C).
  3. Find the crack (usually near the fasteners) and seal it.
  4. Check the ventilation valves - they should allow air to flow freely.

If the reflector is already corroded, the headlight will have to be replaced.

Which H7 lamps are best for Murano Z50: top 5 review

Rating of lamps in terms of price/quality ratio:

  1. Osram Night Breaker Laser (+150% brightness, 1,200 ₽).
  2. Philips X-tremeVision (+130% brightness, 1,000 ₽).
  3. Narva Range Power (increased resource, 800 ₽).
  4. Bosch Pure Light (original quality, 500 ₽).
  5. MTF Light Argentum (cold white light, 700 ₽).

For LED lamps we recommend Philips Ultinon LED (but the control unit needs modification).