Nissan emblem on the radiator grill: how to select, remove and install without errors

The emblem on the radiator grille is not just a logo, but a business card of your Nissan. It emphasizes the status of the car, gives it a complete look and often becomes the object of attention of both owners and others. However, over time, the original trim may fade, break off, or be completely lost - especially after careless washing or a minor accident. In such cases, the car owner is faced with the question: how to choose the right replacement so that it fits perfectly into place, does not stand out and lasts for many years?

In this article we will look at all the nuances - from the differences between original emblems and replicas to step-by-step instructions for dismantling and installation. You will find out which models Nissan require a special approach (for example, Qashqai or X-Trail with chrome grilles), how to avoid damage to the paintwork when removing the old emblem, and what fastenings used in different generations of cars. We will also reveal the secrets of how to distinguish a high-quality replica from a cheap fake, which will begin to peel off in a month.

Original vs replica: how not to make a mistake when choosing an emblem

The first thing the owner faces Nissan when looking for a new emblem, it’s a choice between original part And analogue. Original emblems are supplied in original packaging with the manufacturer's logo, are clearly marked and are usually made of high quality ABS plastic with a chrome or painted finish. Their main advantage is their perfect fit and resistance to external influences. However, the price can be steep: for example, an emblem for Nissan Juke at an official dealership it will cost 3–5 thousand rubles.

Replicas, in turn, are divided into three categories:

• 🔹 Premium analogues (for example, from Dorman or TYC) - practically not inferior to the original in quality, but cost 30–50% less.
• 🔹 Middle segment (brands Febi, Meyle) - decent quality, but slight deviations in color or fastenings are possible.
• 🔹 Budget fakes (unnamed Chinese variants) - often have a dull finish, weak latches and can begin to peel off within a year.

How to distinguish a high-quality replica? Please note:

• 🔍 Plastic thickness - for the original it is usually 2-3 mm, for cheap fakes it is less than 1 mm.
• 🔍 Chrome plating quality — there are no bubbles or abrasions on the original, the coating is smooth and shiny.
• 🔍 Fastenings — latches must be flexible, but strong, without burrs.
• 🔍 Marking - there is always a part number on the back of the original (for example, 265A0-4M000 for Nissan Almera N16).

⚠️ Attention: When purchasing an emblem for models with chrome grille (For example, Nissan Murano Z51 or Pathfinder R52) make sure that the shade of the chrome matches the shade of the grille. Some replicas have a cool bluish sheen, while the originals have a warm golden sheen.

Catalog numbers of emblems for popular Nissan models

In order not to make a mistake with your choice, it is important to know article number of the original emblem for your model. Below is a table with catalog numbers for the most common cars Nissan. Please note that for some models, the emblems differ depending on the year of manufacture and equipment.

Model Nissan	Years of manufacture	Original article	Notes
Qashqai J10/J11	2007–2021	265A0-4M00A (until 2013), 265A0-4M00B (after 2013)	For restyled versions with chrome frame
X-Trail T31/T32	2007–2020	265A0-4M010	For versions with black grille - 265A0-4M011
Juke F15	2010–2019	265A0-4M020	Emblem with 3D effect, attached with double-sided tape
Navara D40	2005–2015	265A0-4M030	For versions with a solid grille (e.g. Off-Road)
Patrol Y62	2010–present time	265A0-4M040	Oversized emblem, snap fastening

If your model is not in the table, use online parts catalogs such as Nissan Parts Europe or Amayama. Enter your vehicle's VIN to get the exact part number. Also note complete set: for example, for Nissan Teana L33 logos vary depending on system availability Intelligent Key (in this case there is space for a sensor on the back of the emblem).

When ordering through online stores (for example, Exist.ru or Autodoc) Always check the part photos and customer reviews. Often the comments indicate whether the emblem is suitable for a particular year of manufacture or requires improvement.

Methods for attaching emblems to the radiator grille

Emblems Nissan They are attached to the radiator grill in three main ways, each of which has its own characteristics. Not only the complexity of installation, but also the durability of the fixation depends on the type of fastening. Let's consider each option in detail.

1. Latches (clips)

The most common method used on most models (Qashqai, X-Trail, Almera). The emblem is fixed on the back of the grille using plastic latches. Benefits:

• ✅ Easy to install and remove.
• ✅ Reliable fixation with proper installation.
• ✅ Possibility of repeated dismantling without damage.

Disadvantages: Over time, the plastic of the latches may burst, especially if the emblem is often removed for washing or painting.

2. Double-sided tape (3M or equivalent)

Used on models with a smooth grille, e.g. Nissan Juke or Micra K13. Adhesive tape is applied to the back of the emblem and pressed against the grille. Benefits:

• ✅ There is no need to disassemble the grill.
• ✅ Quick installation (5-10 minutes).

Disadvantages: if you remove it carelessly, glue may remain on the grille, and the emblem itself will fall off over time due to temperature changes. Important: for reliability, use 3M VHB tape or its high-adhesive analogues (for example, Tesa Powerstrips).

3. Screws or bolts

Found on older models (Nissan Primera P12, Almera N16) or on tuned grilles. The emblem is screwed to the grille from the reverse side. Benefits:

• ✅ Maximum reliability of fixation.
• ✅ Possibility of position adjustment.

Disadvantages: requires care when tightening so as not to damage the grille. Also, with frequent dismantling, the thread may break.

⚠️ Attention: If your emblem is attached with latches, but one of them breaks, do not try to fix the part with superglue or sealant. This will damage the grille the next time it is dismantled. Instead, order a latch repair kit (such as 08915-4M000 for Nissan Qashqai).

Specify the mounting method (latches, tape, screws)

Check the article with the catalog using the VIN code

Evaluate the quality of chrome plating in the product photo

Check reviews for compatibility with your model -->

Step-by-step instructions: how to remove and install the emblem

The process of replacing the emblem seems simple, but in practice many owners Nissan encounter difficulties: broken latches, glue residue on the grille, or incorrect positioning of the new part. To avoid these problems, follow our instructions.

Step 1: Preparing Tools

You will need:

• 🔧 Plastic puller or flat screwdriver (for latches).
• 🔧 Hairdryer (if the emblem is on tape).
• 🔧 Alcohol or solvent (to remove glue).
• 🔧 New emblem and set of latches (if necessary).
• 🔧 Microfiber cloth.

Step 2: Removing the old emblem

If the emblem is attached to latches:

1. Carefully pry the emblem on one side with a plastic puller or a screwdriver wrapped in electrical tape (so as not to scratch the grille).
2. Gradually release all the latches, moving around the perimeter. Do not pull the emblem towards you - this will lead to breakage of the latches!
3. Remove the part and inspect the latches for damage.

If the emblem is on double-sided tape:

1. Heat the mounting area with a hairdryer (temperature ~50°C) for 1–2 minutes.
2. Use a plastic card to pry the emblem off and slowly peel it away from the grille.
3. Remove any remaining adhesive with alcohol or a special cleaner (for example, 3M Adhesive Remover).

Step 3: Install a new logo

For emblems on latches:

1. Align the new emblem with the grooves on the grille.
2. Using light pressure, secure the top part first, then the bottom.
3. Check that the fastening is secure by slightly pulling the emblem towards you.

For emblems on Scotch tape:

1. Clean and degrease the grate surface.
2. Remove the protective film from the adhesive tape on the emblem.
3. Press the part onto the grid and hold for 30-60 seconds for better adhesion.
4. Do not wash your car within 24 hours after installation.

Step 4: Check

After installation, inspect the emblem from a distance of 2–3 meters: it should be strictly in the center of the grille, without distortions. If you notice a discrepancy, carefully adjust the part until the glue (for tape) dries completely or the latches are fixed.

Typical mistakes when replacing an emblem and how to avoid them

Even experienced car owners sometimes make mistakes that lead to damage to the emblem or grille. Here are the most common ones and ways to prevent them:

1. Use of metal tools

Many people try to pry off the emblem with a screwdriver or knife, which leads to scratches on the grille or chips on the part itself. Solution: use a plastic puller or wrap the screwdriver with electrical tape. For models with chrome grille (Nissan Murano, Pathfinder) it is better to avoid metal tools altogether.

2. Gluing the emblem to a dirty surface

If you do not clean the grille from dust, grease or old glue residues, the new emblem on the tape will last a week at most. Solution: thoroughly degrease the surface with alcohol or acetone, then wipe with a dry cloth.

3. Incorrect positioning

An emblem installed crookedly spoils the entire appearance of the car. This often happens due to rush or insufficient lighting. Solution: Before fixing, estimate the position of the part using masking tape to mark. You can also take a photo of the old position of the emblem before dismantling.

4. Ignoring temperature conditions

If you install the emblem on the tape at a temperature below +10°C, the glue will not achieve the required adhesion. Solution: Carry out work in a warm garage or on a sunny day. If necessary, warm up the grill with a hairdryer.

5. Damage to latches during removal

Often latches break due to excessive force or uneven pressure. Solution: release the fasteners one at a time, starting from the top corner. If the latch is broken, do not try to fix it with superglue - replace it with a new one (they cost pennies).

⚠️ Attention: On some models (Nissan GT-R R35, 370Z) the emblem is attached not only to the grille, but also to the system sensor Intelligent Key. When dismantling, do not pull the part sharply - this may damage the immobilizer antenna!

Tuning emblems: customization options

Replacing a standard logo with a custom one is a popular way to highlight your Nissan. Here are a few tuning ideas that will not require major investments, but will turn your car into a unique one:

1. Painting the emblem

One of the most affordable options. You can:

• 🎨 Repaint the emblem in the body color (for example, for Nissan Juke in shade Energy Orange).
• 🎨Make it matte black (popular for Nissan Qashqai in style Black Edition).
• 🎨 Apply chameleon or metallic for a “chrome” effect.

Use aerosol paints for painting Motip or Duplicolor with preliminary priming. After painting, be sure to coat the emblem with varnish to protect it from chipping.

2. Installing a 3D logo

Three-dimensional emblems with a raised logo Nissan look more aggressive than standard ones. They can be ordered from a tuning studio or bought ready-made (for example, from the brand Heise). Please note that these emblems are often bolted on, so the grille may need to be modified.

3. LED backlight

The LED emblem, which lights up when the doors are opened or the lights are turned on, gives the car a futuristic look. To implement you will need:

• 💡 Flexible LED strip (for example, SMD 5050 with moisture protection IP67).
• 💡 Control unit with remote control (optional, for changing color).
• 💡 3M double-sided tape for fixing the tape.

Important: connect the backlight via a relay to the dimensions or a separate switch so as not to drain the battery.

4. Carbon fiber emblem

Lightweight and durable carbon fiber emblems are suitable for sports models (Nissan 370Z, GT-R). They are resistant to corrosion and look stylish, but are more expensive than standard ones. Article example: CF-265A0-4M000 (universal for many models).

5. Vinyl wrap

If you do not want to paint the emblem, you can cover it with vinyl film. Popular options:

• 🎭 Carbon - for sporty style.
• 🎭 Gold/silver - for luxury versions (Nissan Maxima, Teana).
• 🎭 Gloss - for the “mirror” effect.

Vinyl is easy to remove without damage, making this option ideal for experimentation.

How to remove the emblem without damage if the latches are jammed?

If the latches do not budge, try the following:

1. Heat the grill with a hairdryer - the plastic will become more elastic.

2. Use a thin guitar string or fishing line: pass it behind the emblem and carefully saw the latches (only as a last resort!).

3. For models with chrome grille (Nissan Murano) you can use a glass suction cup - it will help to evenly pull the emblem towards you.

Where to buy a Nissan emblem: trusted sources

Not only the price, but also the quality of the part depends on the place of purchase. Here's where it's best to order emblems for Nissanto avoid fakes:

1. Official dealers

Pros: 100% original with guarantee, perfect fit.

Cons: high price (from 2,000 to 6,000 rubles), long wait (if the part is made to order).

2. Online spare parts catalogs

Recommended sites:

• 🛒 Exist.ru - a large selection of originals and high-quality analogues.
• 🛒 Autodoc.ru — convenient search by VIN, frequent discounts.
• 🛒 Amayama.com — original parts from Japan, but long delivery.
• 🛒 Nissan-Parts-Europe.com - official European catalogue.

Tip: when ordering, check whether fasteners are included. For example, for Nissan X-Trail T32 Sometimes they sell the emblem without latches.

3. Markets and car dismantling yards

Pros: low price (from 300 rubles for a used emblem).

Cons: risk of running into a fake or defective part. Always check:

• 🔎 Condition of the latches (are they broken).
• 🔎 Quality of chrome plating (are there any chips or scuffs).
• 🔎 The article matches your model.

4. Tuning studio

If you want a non-standard emblem (backlit, 3D effect or carbon fiber), contact trusted workshops. Examples:

• 🏆 Carbon Miata (Moscow) - specialize in carbon fiber reinforced plastic.
• 🏆 JDM Style (St. Petersburg) - customization in Japanese style.
• 🏆 AutoLight (online) - LED emblems made to order.

5. AliExpress and other Chinese sites

Pros: low prices (from 200 rubles), large selection of designs.

Cons: 90% of products are low-quality replicas with poor fastening. If you still decide to order here, choose sellers with a rating above 98% and read reviews with photos. Pay attention to the materials: for example, emblems made of “ABS + chrome” often turn out to be plastic with a sticker.

FAQ: Frequently asked questions about Nissan emblems

Is it possible to paint the Nissan emblem yourself without removing it from the car?

Technically it is possible, but this can lead to paint smudges on the grille and uneven coating. It is better to remove the emblem, paint it separately, and then install it back. If you are afraid of damaging the latches, use vinyl covering - it can be applied without dismantling.

The emblem on my Nissan Juke fell off a month after being installed with tape. What to do?

Most likely, you used low-quality glue or did not degrease the surface. Remove any remaining tape with solvent, clean the grille with alcohol, and install the logo with new 3M VHB or Tesa Powerstrips. Also check if the grille is getting hot from the radiator - in this case the glue may melt.

On my 2018 Nissan Qashqai, the emblem is attached with latches, but one broke. Is it possible to replace just the latch?

Yes, for Qashqai J11 repair kits for latches are sold (item no. 08915-4M000). They can be ordered from an authorized dealer or from online spare parts stores. They are inexpensive (about 100–200 rubles per set), and they can be replaced in 5 minutes.

I want to put a Nissan GT-R emblem on my X-Trail. Is this possible?

Technically yes, but the fastenings will have to be modified. Emblem GT-R wider and has a different bend, so you can’t just attach it. Options:

1. Order an adapter for mounting (available from the tuning studio).
2. Remake the grille for a new emblem (milling or 3D printing of the insert).
3. Use double-sided tape, but this is unreliable for such a heavy emblem.

Please note that such a replacement may look ridiculous if it does not match the overall style of the car.

After a high pressure wash, the emblem began to come off. How to fix it?

Probably, a stream of water got under the emblem and weakened the glue. If the emblem is on tape:

1. Remove it, clean the grille and emblem from any glue residue.
2. Apply a new layer of 3M VHB tape.
3. When installing, additionally secure the emblem with masking tape for 24 hours.

If the emblem is on the latches, check their integrity - perhaps they were deformed due to water pressure. In the future, avoid pointing the jet directly at the emblem.