Wipers for Nissan Almera G15: sizes, selection and replacement

Choosing the right wipers for Nissan Almera G15 - a task that seems simple only at first glance. Not only visibility during rain, but also the durability of the windshield wiper mechanism depends on the size and quality of the blades. In this article we will analyze exact dimensions of wipers for all modifications Almera G15 (2012–2022), selection nuances depending on the year of manufacture and configuration, and we will also give step-by-step instructions for replacement.

Many owners are faced with a problem: original brushes wear out quickly, and analogues are not always suitable. We tested popular brands (Bosch, Denso, Valeo) and found which models cope better with Russian weather conditions. You will also learn why do restyled versions (from 2019) sometimes require wipers 1–2 cm shorter than standard ones? - this nuance is often missed even in official services.

Official wiper sizes for Nissan Almera G15

According to factory specifications, for Nissan Almera G15 (including restyled versions) the following sizes of windshield wiper blades are provided:

• 🚗 Driver's side (left brush): 600 mm (60 cm)
• 🚗 Passenger side (right brush): 400 mm (40 cm)
• 🚗 Rear wiper (for hatchback): 300 mm (30 cm)

However, there are important clarifications here. On models Almera G15 2019–2022 with an updated windshield shape (the so-called “restyling 2”) sometimes a driver’s blade length is installed 580 mm. This is due to the change in curvature of the glass at the top. If standard 600 mm leave uncleaned areas around the edges - check the markings on old wipers or measure them with a tape measure.

Year of manufacture	Body type	Left brush (driver)	Right brush (passenger)	Rear brush
2012–2018	Sedan	600 mm	400 mm	—
2019–2022	Sedan	600 mm* (or 580 mm)	400 mm	—
2015–2022	Hatchback	600 mm	400 mm	300 mm

*For restyled versions with a modified windshield.

⚠️ Attention: If you buy wipers length 600/400 mm, but they do not reach the edges of the glass, do not rush to blame the seller. Most likely, you have a restyled version with modified glass - try the brush on 580 mm for the driver's side.

How to check the size of the wipers on your car

Even if you are sure of the year of manufacture and configuration, it is better to double-check the dimensions before purchasing. Here's a simple way:

1. Raise the wiper to the vertical position (don't forget to turn off the ignition!).
2. Take a tape measure or ruler and measure the length rubber part (excluding plastic fastening).
3. Compare with factory sizes from the table above.

If the brushes are already worn out, you can rely on the metal frame: its length is usually 2–3 cm shorter than the total length of the wiper. For example, for a brush 600 mm the frame will be about 570–580 mm.

Another reliable way is to look at the markings on the back of the original brushes. Manufacturers often indicate the size there in millimeters or centimeters. For example, the inscription "Nissan 28560-BM40A" matches the left wiper 600 mm for Almera G15.

Which wipers are better to choose: review of brands and types

The market offers three main types of wipers for Nissan Almera G15:

• 🔹 Frame - classic brushes with a metal base. Cheap, but less durable in Russian conditions (icing, salt on the roads).
• 🔹 Frameless - a modern version with a uniform fit to the glass. Better cope with high speeds and icing.
• 🔹 Hybrid — combine a frame structure with an aerodynamic casing. The optimal choice in terms of price/quality ratio.

From trusted brands for Almera G15 we recommend:

Brand	Type	Pros	Cons	Average price (set)
Bosch Aerotwin	Frameless	Excellent aerodynamics, quiet, long service life	High price, fakes on the market	2 500–3 200 ₽
Denso Hybrid	Hybrid	Good fit, resistant to icing	Difficult to find in small towns	2 000–2 700 ₽
Valeo Silencio X-TRM	Frameless	Quiet, effective in heavy rain	Rubber hardens in the cold	1 800–2 400 ₽
Nissan Original	Frame/hybrid	Perfect fit, manufacturer's warranty	The price is 1.5–2 times higher than analogues	3 500–4 500 ₽

For Russian conditions, the optimal choice would be hybrid wipers - they better withstand temperature changes and mechanical loads. If your budget is limited, take frameless ones Valeo or frame TRW (about 1,200 ₽ per set).

Step-by-step instructions for replacing wipers

Replacing brushes with Nissan Almera G15 takes no more than 10 minutes and requires no tools. Follow this instruction:

1. Place the car on a level surface and turn off the ignition (so that the wipers don't turn on accidentally).
2. Raise the wiper to the vertical position. It should lock at an angle of ~90° to the glass.
3. Press the fastener (usually a plastic latch at the base of the blade) and remove the old wiper.
4. Install the new brush, aligning the mount with the hook on the lever. You should hear the latch click.
5. Lower the wiper onto the glass and check operation at minimum speed.

If the brush does not lock or is loose, check:

• 🔧Adapter compatibility (for Almera G15 needed U-hook 9x3 or 9x4).
• 🔧 Integrity of the plastic retainer on the wiper lever.
• 🔧 No ice or dirt in the fastening mechanism.

Sizes match factory ones

Mounting type (U-hook 9x3/9x4)

Integrity of the rubber part (no cracks)

Availability of adapters included (if universal brushes) -->

⚠️ Attention: Never raise the wipers manually if they are in the down position (with the ignition off). This may damage the drive mechanism. Always turn the ignition on, briefly activate the windshield wipers before lifting them to replace them.

Common mistakes when choosing and replacing wipers

Even experienced drivers sometimes make mistakes that lead to poor windshield wiper performance. Here are the most common:

• 🚫 Buying brushes by eye. Size 600/400 mm suitable for most Almera G15, but on restyled versions it may be required 580 mm.
• 🚫 Ignoring fastening type. On Almera G15 hook is used U-hook, but some universal brushes require adapters.
• 🚫 Saving on quality. Cheap frame wipers (price up to 500 ₽) last 1–2 months and do not clean well in cold weather.
• 🚫 Replacement of only one brush. If you change the driver's windshield wiper, be sure to update the passenger's wiper as well - varying wear leads to uneven cleaning.

Another typical problem is creaking or knocking noise during operation. This happens due to:

• 🔊 Incorrect installation (the brush is skewed relative to the glass).
• 🔊 Rubber wear (microcracks appear).
• 🔊 Ingress of sand or ice between glass and rubber.

If the squeak appears immediately after replacement, check:

1. Correct installation (the brush should lie flat, without distortions).
2. Clean glass (wipe it with alcohol or a special cleaner).
3. Quality of rubber (cheap brushes often have manufacturing defects).

Caring for wipers: how to extend their service life

The average service life of windshield wiper blades is 6–12 months, but with proper care this period can be increased to 1.5–2 years. Here's what the experts recommend:

• 💧 Regular cleaning. Once a month, wipe the rubber with a damp cloth and soapy water to remove road chemicals and dust.
• ❄️ Anti-icing. Before frost, treat the brushes with silicone lubricant (for example, WD-40 Specialist).
• 🚿 Proper use. Do not turn on the wipers on dry glass - this wears out the rubber.
• 🅿️ Parking. In severe frost, raise the wipers vertically to prevent them from freezing to the glass.

In summer, pay special attention UV protection. The sun breaks down rubber, making it brittle. Use special sprays (for example, Sonax Xtreme) or park in the shade. If the wipers begin to “smudge” after the heat, they can be revived by wiping the rubber with medical alcohol.

For the winter period it is better to choose brushes with graphite coating (For example, Bosch Winter or Denso Ice Blade). They do not tan in the cold and remove snow more effectively. Also check the operation of the washer - if the fluid freezes in the nozzles, this will accelerate the wear of the wipers.

What to do if the wipers are frozen to the glass?

Do not try to turn them on - this will break the mechanism. Pour warm (not hot!) water over the base of the brush or use a defroster (for example, Liqui Moly Anti-Frost). After defrosting, wipe the glass and rubber with a dry cloth.

Where to buy wipers for Nissan Almera G15: prices and tips

Buy windshield wiper blades for Almera G15 possible in the following places:

Where to buy	Pros	Cons	Average prices (set)
Official Nissan dealer	Guarantee of original spare parts, precise selection	Expensive, limited range	3 500–5 000 ₽
Auto stores (AvtoDelo, Existence, ATL)	Wide selection of brands, touch before you buy	Prices are higher than online	1 500–3 500 ₽
Online (Wildberries, Ozon, Exist.ru)	Low prices, customer reviews, delivery	Risk of running into a fake, difficult to check the fastening	1 000–3 000 ₽
Used markets (Avito, Drom)	You can find almost new brushes for 30–50% of the price	No guarantee, risk of buying worn	500–1 500 ₽

When purchasing online, pay attention to:

• 📦 Availability of adapters included (for Almera G15 needed U-hook 9x3/9x4).
• 📦 Country of origin. Original Bosch And Denso made in Germany/Japan, fakes in China.
• 📦 Reviews with photo. Often sellers insert photos of original brushes and send counterfeit ones.

If you are buying used wipers, check:

1. Condition of the rubber (are there any cracks or abrasions).
2. Mobility of the hinges (they should move smoothly, without squeaking).
3. The integrity of the fastening (is there any play on the hook).

Left brush - 28560-BM40A (600 mm)

Right brush - 28561-BM40A (400 mm)

This will help avoid fakes.-->

FAQ: Frequently asked questions about wipers Nissan Almera G15

Is it possible to install wipers longer than 600/400 mm?

No, this will lead to several problems:

• The brushes will touch each other or the edges of the body.
• The load on the wiper motor will increase, which will reduce its service life.
• The aerodynamics will deteriorate - at speeds over 100 km/h the wipers may be disrupted.

If the standard sizes do not clear the edges of the glass, check its curvature (you may have a restyled version) or adjust the angle of the arms.

Which brand of wipers is the quietest for Almera G15?

According to test results, the quietest brushes for Almera G15:

1. Bosch Aerotwin — noise level ~45 dB at a speed of 60 km/h.
2. Valeo Silencio X-TRM — a special rubber mixture absorbs vibrations.
3. Denso Hybrid — optimal balance of price and silence.

The noise is often caused by improper installation or worn rubber. If the brushes begin to creak after 1–2 months, check the cleanliness of the glass and the condition of the rubber edges.

What to do if the wipers do not adhere well to the glass?

The problem is usually related to:

• Rubber wear — replace the brushes.
• Frame deformation — check for bent metal plates.
• Glass contamination - wipe it with alcohol or a special cleaner (for example, Sonax Glass Cleaner).
• Incorrect fastening — the brush must be fixed until it clicks.

If the problem persists, try adjust the angle of the levers. To do this:

1. Remove the decorative trim under the wipers.
2. Loosen the lever securing nut (10mm wrench).
3. Move the lever slightly to the desired direction and tighten the nut.

How much do original wipers cost on Almera G15?

Prices for original brushes Nissan for Almera G15 (as of 2026):

• Left brush (28560-BM40A, 600 mm) — 2 200–2 800 ₽.
• Right brush (28561-BM40A, 400 mm) — 1 800–2 300 ₽.
• Rear brush (28580-BM40A, 300 mm) — 1 500–1 900 ₽.

Original wipers last longer than analogues (1.5–2 years), but their price is 2–3 times higher than that of brands like Bosch or Denso. If the budget is limited, it is better to take high-quality analogues - the difference in resource will be insignificant.

Is it possible to restore old wipers?

Yes, but this is a temporary solution. Resuscitation methods:

• 🔧 Processing with sandpaper. Fine-grained skin (P1000–P1500) Gently walk along the rubber edge to remove any burrs.
• 🔧 Silicone grease. Apply to rubber WD-40 Specialist Silicone - this will restore elasticity.
• 🔧 Edge trimming. Using a sharp knife, cut the edge of the rubber at an angle of 45° (as on new brushes).

These methods will extend the life of wipers by 1–2 months, but they will not replace a full replacement. If the rubber is cracked or peeling off, the brushes should only be disposed of.