Door cards <em>Nissan Almera G15</em>: disassembly, repair and replacement with your own hands

Nissan Almera G15 is a popular sedan that is valued for its reliability and ease of maintenance. However, even with this model, the door cards wear out over time: squeaks, cracks appear, the upholstery peels off, or fasteners break. In this article we will look at how to independently dismantle, repair or replace door cards on Almera G15without contacting the service.

We will look at original and alternative map options, typical problems (for example, falling off handle or sagging upholstery), and also give step-by-step instructions with photos and tips on choosing materials. We will pay special attention to the nuances that are often missed in standard manuals - for example, how not to damage window wiring or how to treat the plastic before gluing new upholstery.

Door card design Nissan Almera G15: what are they made of?

Door card (or door trim) in Almera G15 - This is a multi-layer structure that plays not only a decorative, but also a functional role. It consists of:

• 🔹 Bases made of plastic or pressed cardboard - adds rigidity and shape.
• 🔹 Soundproofing layer (most often - bitumen mastic or polyurethane foam).
• 🔹 Upholstery — fabric, artificial leather or vinyl (depending on the configuration).
• 🔹 Fastening elements: caps, screws, latches.
• 🔹 Decorative inserts (chrome, metal-look plastic) - in top versions.

Unlike more expensive models Nissan (For example, Teana or X-Trail), in Almera G15 the cards do not have complex electronics - only window lift buttons and, in some trim levels, speakers. This simplifies their dismantling, but requires caution when working with wiring connectors.

Important: in door cards Almera G15 2013–2018, fragile plastic is often used to attach the handle - if removed carelessly, it breaks, and you have to look for an original spare part (article: 80910-BM40A for the right door).

Typical door card problems: when replacement or repair is needed

Owners Almera G15 The most common problems encountered are:

• 🚨 Cracks in plastic - especially in the places where the handle or armrest is attached.
• 🚨 Upholstery peeling — the glue loses its properties over time, the fabric “bubbles.”
• 🚨 Creaks and knocks - due to wear and tear of sound insulation or loose fastenings.
• 🚨 Broken clips — the pistons break when the door is opened frequently.
• 🚨 Damp smell — if the door seals are worn out, moisture penetrates under the trim.

Many problems can be fixed without completely replacing the card. For example, cracks in plastic repaired using epoxy resin or a soldering iron, and peeling upholstery - re-glued with special glue (we recommend 3M Super Trim Adhesive). However, if the card is deformed or the fasteners are broken, it is easier to buy a new one.

⚠️ Attention: If rust appears under the door trim, this is a sign of damage. internal metal frame. In this case, it is not enough to replace the card - you need to treat the corrosion and restore the tightness of the seals.

How to remove the door card on Nissan Almera G15: step by step instructions

Removing door trim is a task that even a novice can handle if done carefully. You will need:

• 🔧 Flat screwdriver (or special clip remover).
• 🔧 Phillips screwdriver (for screws at the bottom of the door).
• 🔧 Plastic spatula (so as not to damage the casing).
• 🔧 Marker (to mark the location of the clips).

Sequence of actions:

1. Disable negative battery terminalto avoid short circuit when working with wiring.

2. Remove the decorative trim on the door handle (pry it out from the side with a screwdriver).

3. Unscrew the screw under the trim (usually it is hidden under the plug).

4. Carefully pry up the trim from the bottom corner and snap off the clips around the perimeter. Start in the corner where there is no speaker!

5. Disconnect the wiring connectors (window regulators, buttons, speaker).

Advice: If the clips are broken, do not use self-tapping screws to attach new trim - this will lead to squeaks. It is better to buy a set of pistons (article: 77010-3M000 for Almera G15).

Disconnect battery

Remove the decorative handle trim

Unscrew the screws (if any)

Pry off the casing with a plastic spatula

Disconnect all wiring connectors

Mark the location of the clips with a marker-->

Original vs. analogues: what to choose for replacement

When purchasing a new door card for Almera G15 you have three options:

Card type	Pros	Cons	Average price (per 1 piece)
Original (Nissan)	Perfect fit, factory quality materials	Expensive, long wait (made to order)	8 000 — 12 000 ₽
Analogue (Dorman, Febi)	Cheaper than the original, good quality plastic	Upholstery color may vary	3 500 — 6 000 ₽
Used (from disassembly)	Low price, original quality	Risk of hidden defects, limited choice	1 500 — 4 000 ₽
Universal (trimming)	The most budget option	Needs improvement, poor sound insulation	800 — 2 000 ₽

If you choose original map, pay attention to the articles:

• 🔢 Left front: 80911-BM40A
• 🔢 Right front: 80910-BM40A
• 🔢 Rear (universal for both sides): 80915-BM40A

Saving tip: If you need a replacement just because the upholstery is worn, consider constrictions. Workshops offer this service for 2,000–4,000 rubles per card (depending on the material). Popular options: faux leather Alcantara or vinyl with a carbon fiber texture.

⚠️ Attention: When purchasing analogues, check compatibility with your equipment! For example, cards for the version with electrical accessories (with power window buttons) are not suitable for the basic configuration (there are different holes for handles).

Door card repair: from cracks to upholstery restoration

A complete replacement is not always required - many defects can be eliminated yourself. Let's look at the most common cases:

1. Repairing cracks in plastic

To restore use:

• 🛠️ Epoxy resin + fiberglass - for through cracks.
• 🛠️ Soldering iron + plastic rods - for minor damage.
• 🛠️ Liquid plastic (eg. Plasti Dip) - to disguise chips.

After the repair, be sure to putty and paint the repair area in the interior color (paint code for Almera G15 — KH3 "Beige" or NV1 "Black", depending on the configuration).

2. Re-gluing the upholstery

If fabric or leather peels, proceed as follows:

1. Remove the old upholstery (you can heat it with a hairdryer to make the process easier).
2. Clean the base from any remaining glue (use white spirit or acetone).
3. Apply new glue (we recommend 3M 8087-36 or Kleo Ultra Contact) and press the upholstery with a roller.
4. Leave under pressure for 12–24 hours.

3. Elimination of squeaks

Creaks usually occur due to:

• 🔊 Friction of plastic on metal - treat contact points silicone grease.
• 🔊 Loose clips - replace them with new ones or add rubber gaskets.
• 🔊 Worn sound insulation - stick an additional layer SPLEN 3004 or Bimast Bomb.

Soundproofing door cards: is it worth it?

Many owners Almera G15 complain about poor sound insulation of the cabin. Door cards are one of the most transparent places for external noise. There are two ways to improve the situation:

1. Additional pasting with vibration and noise insulation (materials: STP Aerolight, Accent Premium).

2. Replacing standard sound insulation to a denser one (for example, Shumoff Comfort).

Recommended pasting scheme:

1. Remove the door card.
2. Clean the metal surface of the door from old mastic.
3. Stick vibration insulation (Bimast Super or STP Vibroplast M1) on 70–80% of the area.
4. Add a layer of sound insulation on top (SPLEN 3004 or Accent 10).
5. Install the card back, having previously pasted over its inner side foam rubber 5–10 mm thick.

What happens if you overdo it with sound insulation?

If the material is too thick, it may cause the door card to not stay in place or become deformed when the door is closed. In addition, excess weight impairs the operation of the window lift mechanism and increases the load on the hinges.

According to owners' reviews, after completely soundproofing the doors, the noise level in the cabin is reduced by 20–30%. The improvement is especially noticeable at speeds above 90 km/h.

Where to buy door cards for Nissan Almera G15: verified suppliers

When searching for spare parts for Almera G15 We recommend the following options:

• 🛒 Official Nissan dealers - guarantee of original parts, but high price and long delivery times.
• 🛒 Online stores:
  • Exist.ru - a wide range of analogues.
  • Autodoc.ru — convenient selection by VIN code.
  • Emex.ru — there are often discounts on original spare parts.
• 🛒 Showdown - the cheapest, but you need to check the condition of the part. We recommend:
  • Avito Analysis (filter by reviews).
  • Drom.ru (look for sellers with photos of parts).
• 🛒 Upholstery workshops — if you need to restore an old card. Average price of the service: 2,500–5,000 rubles.

When purchasing used cards, be sure to check:

• 🔍 Equipment (is there an electrical package, speakers).
• 🔍 Interior color (codes: KH3 - beige, NV1 - black, V91 - gray).
• 🔍 Condition of clips and fastenings (often they break when removed).

FAQ: Frequently asked questions about door cards Nissan Almera G15

Is it possible to wash door cards without removing them?

Yes, but carefully. Use a damp microfiber cloth and a mild detergent (such as Sonax Xtreme). Do not use aggressive chemicals (solvents, alcohol) - they can damage the upholstery. Suitable for removing stains from fabric cards Vanish for the salon.

How many clips are needed to install one door card?

B Almera G15 8–10 pistons are used per card (depending on the door). We recommend buying a set with a reserve (article: 77010-3M000), since when dismantling 1-2 clips often break. The cost of a set (20 pcs.) is about 300 ₽.

What is the difference between the cards for front and rear doors?

Front cards have:

• Holes for handle and armrest.
• Fastenings for power window buttons (in configurations with electrical accessories).
• Larger size and weight (due to additional elements).

Rear cards are simpler - without an armrest and buttons, but may have holes for speakers (in versions with an audio system Bose). Article numbers for front and rear cards not interchangeable!

How to eliminate the smell of dampness from under the door card?

The reason is moisture entering through worn seals. To fix the problem:

1. Remove the card and dry the inner cavity of the door (you can use a hairdryer).
2. Treat the metal with an anti-corrosion compound (Molykote or Liqui Moly Unterbodenschutz).
3. Check the condition of the rubber seal along the door contour - replace if necessary (part number: 80250-JM00A).
4. Place moisture-absorbing material (such as silica gel in bags).

If mold has already appeared, clean the surface chlorhexidine or Miramsteen.

Is it possible to install cards from Nissan Note or Tiida on Almera G15?

No, these models have different door shapes and fastenings. Cards from Note or Tiida will not fit either in size or in the location of the holes for handles and speakers. The only option is universal cards, but they will have to be trimmed and modified.