A situation where a car tire is punctured or flat can happen to every crossover owner Nissan Qashqai. In modern configurations, manufacturers often abandon a full-size spare tire in favor of a compact temporary tire, popularly called a “dokatka”. This solution saves space in the trunk and reduces the overall weight of the vehicle, which has a positive effect on fuel consumption.
However, many car owners do not fully understand the operating features of such an element. Usage dokatki requires strict adherence to the rules: speed limits, a ban on aggressive driving and the need to urgently replace a damaged wheel. Ignoring these nuances can lead to loss of controllability on wet roads or damage to the transmission.
In this article we will look in detail at what types of temporary tires are suitable for the model Nissan Qashqai, how to install them correctly, what pressure parameters to pay attention to, and why you can’t use the re-roller as a permanent element of the car’s chassis.
Types of temporary spare tires for Nissan Qashqai
The manufacturer may equip the vehicle with different types of temporary solutions depending on the year of manufacture and market region. Most often the owners Nissan Qashqai are faced with two options: a classic “full-size” mini-spare and a narrow wheelset labeled T155.
The first option is a smaller diameter wheel but with a wider tire, which could theoretically last longer. The second option is a narrow tire on a small rim, which takes up minimal space. It is important to understand that dimensions of the dokatka differ from standard wheels, which changes the ground clearance and behavior of the car on the road.
Some owners prefer to install a full-size spare tire themselves, replacing the standard “thin” tire. This is possible, but requires checking the compatibility of the disc and the availability of space in the trunk niche. For model Nissan Qashqai J10 and J11 have specific requirements for mounting and disk parameters.
- 🛑 Narrow extension T155/70R16 is the most common option for saving space.
- 🔧 Full-size spare tire - requires checking compatibility with the trunk niche.
- ⚙️ Tire repair kits are an alternative to rolling, but are not always effective for severe cuts.
⚠️ Attention: Using wheels with different diameters on the same axle (for example, a stock tire at the front and a standard tire at the rear) can lead to damage to the all-wheel drive differential!
If your vehicle is equipped with a four-wheel drive system, installing a temporary spare tire requires special care. Manufacturers strongly recommend using a re-roller on only one axle and replacing it with a standard wheel as quickly as possible.
- Narrow dokatka (T155)
- Full size spare tire
- Repair kit (compressor + sealant)
- No spare wheel at all
Technical characteristics and markings
Before you hit the road with a flat tire, you should carefully examine the markings on the sidewall of the temporary tire. For Nissan Qashqai Most often, tires with a load and speed index that are lower than those of the main wheels are used. Typically this speed limit is up to 80 km/h.
The pressure in such a tire should be significantly higher than in conventional wheels. The standard value for re-rolling is approx. 4.2 bar (60 PSI). This is necessary so that the narrow wheel can withstand the weight of a heavy crossover and provide the necessary sidewall rigidity.
The temporary spare wheel rim is often of a different size and design. It may be steel, painted yellow or orange, which serves as a visual warning to the driver that it is not a stock wheel. Disk size usually 1-2 inches less than standard.
- 📏 Diameter: most often R16 or R17, depending on standard wheels.
- 🔩 Width: narrow (T155), which creates aerodynamic noise and reduces grip.
- 💨 Pressure: Maintaining high pressure (about 4.2 bar) is critical.
When purchasing a spare tire, it is important to consider not only the size, but also the mounting options. For Nissan Qashqai, a mount with five bolts or nuts (bolt pattern 5x114.3) is used. An incorrectly selected wheel may not fit on the hub or may unscrew along the way.
⚠️ Attention: The pressure in the dokatka drops over time. Before each trip with the spare tire installed, be sure to check the value in
4.2 bar.
What does the marking T155/70R16 mean?|T - temporary (Temporary), 155 - profile width in mm, 70 - profile height as a percentage of the width, R16 - radial type and disc diameter 16 inches.-->
Rules for installing and replacing wheels
The process of changing a wheel on a Nissan Qashqai has its own nuances, especially when it comes to a model with all-wheel drive. First of all, you need to fix the car on a flat surface and turn on the handbrake. Wheels located diagonally from the one being replaced must be supported by chocks.
To lift the car, use a standard jack, which is located under the trunk floor. The jack's fulcrum point is specified in the owner's manual and is usually a reinforced protrusion in the vehicle's sill. Improper installation of the jack may result in body damage or overturning.
After lifting the car, unscrew the wheel bolts. It is important not to remove them completely before lifting, so that the wheel does not fall off. Remove the punctured wheel, clean the hub from dirt and refit it. Hand tighten the bolts, then lower the vehicle and tighten them with a torque wrench.
☑️ Procedure for replacing a wheel on a Nissan Qashqai
Done
☑️ Procedure for replacing a wheel on a Nissan Qashqai
0 / 6