Crossover Nissan Atlas (also known as Nissan NP300 in some regions) is a reliable and practical car that deserves to be treated with care. One of the first steps to protect the interior from wear, dirt and mechanical damage is the installation of high-quality covers. However, not all covers are created equal: the wrong material can cause your seats to slip, and the wrong size can tear seams or distort the upholstery.
In this article we will look at which cases are best to choose for Nissan Atlas depending on the year of manufacture and configuration, how to install them correctly, and we will also reveal the secrets of care that manufacturers are silent about. You'll find out why fabric cases with silicone base preferable for hot climates, and leather analogues require special fastening. We will also analyze reviews from owners and compile a rating of proven brands - from budget to premium segment.
Which covers are suitable for Nissan Atlas: types and materials
Choosing cases begins with understanding for what purpose they are being purchased. If you need maximum protection against dirt and moisture (for example, for hunting trips or family travel), covers made of neoprene or PVC. Better suited for daily use in the city breathable fabric options impregnated from dust.
Let's look at the main types of materials:
- 🧵 Fabric covers (polyester, nylon): lightweight, breathable, but require regular washing. Ideal for warm climates.
- 🐄 Genuine leather: premium option, but sensitive to temperature changes. In hot weather it can stick to the body.
- 🧪 Artificial leather (eco-leather): a budget alternative to natural, resistant to moisture, but less durable.
- 🧽 Neoprene covers: Waterproof, often used to protect against snow and dirt. The downside is that they can get hot in the sun.
- 🧴 Silicone pads: Prevents slipping, but does not protect against dust. Good as an addition to the main cases.
Important: For 2018-2023 Nissan Atlas, the covers must have reinforced side inserts - in these models, the headrests are attached at an angle, and standard covers can slide out.
If you often transport pets, pay attention to covers with anti-claw impregnation (for example, from a brand Covercraft). For families with children, models with water-repellent layer and pockets for toys.
- Fabric
- Leather
- Neoprene
- Faux leather
- Other
Sizes and configurations: how not to make a mistake with your choice
One of the main issues when buying covers is whether they fit the size of the seats. Nissan Atlas was produced in several configurations, and even within the same year they may differ:
- 🪑 Front seats: heated/without, with lateral support or standard.
- 🚗 Rear seats: solid or 60/40 split.
- 🧩 Headrests: removable or integrated.
To avoid mistakes, measure the following parameters (in cm):
| Parameter | Front seat | Back seat |
|---|---|---|
| Back width | 50–55 | 130–140 |
| Back height | 55–60 | 40–45 |
| Seat depth | 45–50 | 40–45 |
| Distance between head restraints | 20–25 | 30–35 |
🔹 Advice: If in your Atlas power seats are installed, look for covers with elastic slits for control buttons. Brands Katzkin And Wet Okole offer such models.
⚠️ Attention: Cases for Nissan Navara (even the same year) are not suitable for Atlas — these models have a different shape of the rear seat back!
Top 5 brands of covers for Nissan Atlas: comparison and reviews
There are dozens of manufacturers on the market, but not all guarantee a perfect fit. We analyzed owner reviews Nissan Atlas (2015–2023) and compiled a rating of proven brands:
- Covercraft — premium segment, cases from Sunbrella (resistant to UV rays). Average price: 12,000–18,000 rubles.
- Wet Okole — neoprene covers for extreme conditions. Popular among fishermen and hunters. Price: 8,000–14,000 RUR.
- Katzkin — leather cases tailor-made for a specific model. 3 year warranty. Price: 15,000–25,000 RUR.
- Sparco — sports covers with improved lateral support. Suitable for active driving. Price: 6,000–10,000 RUR.
- Autostyle - a budget option (from 3,000 ₽), but the quality of the seams is often poor. We recommend for temporary use.
📌 Owner review (Nissan Atlas 2020): *“I bought Wet Okole covers for the winter - they don’t get wet and are easy to clean. In the summer I switched to Katzkin, as neoprene gets very hot. The only disadvantage of Katzkin is the long wait for tailoring (about 3 weeks).”*
If you are looking universal covers, pay attention to models from Clazzio — they are adjustable in size using Velcro. However, for a perfect fit, it is better to order covers for a specific configuration.
Before purchasing, check whether the brand has a guarantee on tailoring. For example, Katzkin provides a guarantee only when installed in certified centers.
Step-by-step instructions: how to install covers yourself
Installing covers on Nissan Atlas takes from 30 minutes to 2 hours depending on the type of fastening. You will need:
- 🔧 Flat screwdriver (for prying off plastic clips).
- 🧲 Magnetic search engine (if you drop the fastener under the seat).
- 🧴 Silicone grease (for a tight fit of leather cases).
Step 1: Preparing the seats
Move the seats as far as possible to gain access to the mountings. If your model has side airbags, make sure that the covers do not block their operation (look for the marking SRS-compatible).
Step 2: Installing Front Covers
- Place the cover over the back of the seat, lining up the headrest slots.
- Secure the lower straps under the seat (use the included plastic clips).
- Pull up the sides of the cover, fixing them on
adjustment levers.
Step 3: Installing the Rear Covers
The main thing here is to correctly distribute the tension. If the cover comes off, use additional Velcro fastenings (sold separately). For models with folding armrest You will need a cover with a cut.
☑️ Checklist before installation
⚠️ Attention: If in your Atlas seats installed ventilation, do not use covers made of dense materials (for example, neoprene) - this will interfere with air circulation!
Caring for covers: how to extend their service life
Even the most expensive cases will not last long if they are not properly cared for. Basic rules:
- 🧼 Fabric covers: Machine washable at 30°C with liquid powder (no bleach!). Dry flat.
- 🧴 Leather cases: wipe with damp microfiber with added leather conditioner (once a month).
- 🚿 Neoprene covers: wash with soapy water, do not machine wash.
- ☀️ All types of cases: Avoid direct sun - UV rays destroy fibers.
Critical error: using aggressive cleaning agents (e.g. Domestos) to remove stains. This causes the leather to crack and the fabric to fade.
🔧 Advice for owners of light-colored cases: Treat them once every 2 months antistatic spray - this will reduce the adhesion of dust and animal hair.
If the covers begin to creak (important for leather models), apply to the inside silicone grease (For example, WD-40 Specialist). This will eliminate friction between the cover and the seat trim.
What to do if the cover is torn?
If the gap is small (up to 3 cm), use fabric repair kit (eg Tenacious Tape). Suitable for leather cases liquid skin (for example, brand Leather Magic). In case of serious damage, it is better to contact a workshop - independent repairs may worsen the situation.
Trunk and Floor Covers: Extra Protection
In addition to the seats, Nissan Atlas vulnerable to wear salon floor And trunk. To protect them use:
- 🚗 Rubber mats (For example, WeatherTech): accurately follow the shape of the floor, retain moisture.
- 🧺 Textile rugs with a rubber base: softer, but require frequent washing.
- 📦 Trunk covers from Cordura: Protects against scratches when transporting goods.
📏 Important: For Atlas with all-wheel drive (4WD) choose rugs with reinforced sides — they will prevent dirt from getting under the pedals.
If you frequently transport large items, consider trunk organizer cover with pockets (for example, from CargoTech). It not only protects the cladding, but also helps to efficiently use space.
Where to buy covers for Nissan Atlas: verified stores and prices
Prices for cases vary from 2,000 to 30,000 rubles depending on the material and brand. Where is the best place to buy:
| Store | Pros | Cons | Average check |
|---|---|---|---|
| Official Nissan dealers | Fit guarantee, original materials | Expensive, limited range | 15 000–25 000 ₽ |
| Wildberries, Ozon | Fast delivery, frequent discounts | Risk of running into a fake | 3 000–12 000 ₽ |
| Specialized websites (autochehly.ru, chehly-profi.ru) | Wide selection, manager consultations | Long delivery (1–3 weeks) | 5 000–20 000 ₽ |
| Tailoring studio | Perfect fit, choice of fabric | Expensive, long (from 2 weeks) | 20 000–30 000 ₽ |
💡 Lifehack: Before purchasing on marketplaces, check reviews from photo of installation — often sellers post photos from other car models.
If you are looking budget option, pay attention to the covers from Autostyle or CarPoint - they are often in stock and of acceptable quality. For the premium segment the best choice is Katzkin or Covercraft.
Before purchasing, check with the seller whether the covers are suitable for your configuration (for example, with or without heated seats). This will save time and nerves.
FAQ: Frequently asked questions about covers for Nissan Atlas
Can the covers be washed in a washing machine?
Fabric covers (polyester, nylon) can be machine washed on a delicate cycle (30°C, no spin). Leather and neoprene covers cannot be washed - they must be cleaned by hand with a damp cloth and soapy water.
How to prevent seat covers from slipping?
Use cases with silicone base or rubber inserts on the underside. You can also buy anti-slip pads (sold in car dealerships) and put them under the covers.
Will Nissan Navara covers fit the Atlas?
No, these models have different rear seat back shapes and head restraint placements. Cases from Navara will either dangle or tighten, which will lead to rapid wear.
How often should covers be changed?
Service life depends on the material:
- Fabric covers: 2–3 years (with regular washing).
- Leather cases: 5–7 years (with proper care).
- Neoprene covers: 3-5 years (lose elasticity over time).
If the covers have lost their shape or have holes, it is best to replace them - this is a sign that they no longer protect the seats.
Can seat covers be installed on heated seats?
Yes, but you need to choose cases with perforation or from thin breathable materials (For example, alcantara). Thick covers (neoprene, thick leather) will impair thermal conductivity and heating will work less efficiently.