Radio tape recorder Clarion 08IT - standard multimedia solution for many models Nissan, including Qashqai, X-Trail And Juke. This device combines the functions of an audio system, navigation and hands-free, but often raises questions among owners. Why doesn't the screen respond to touch? How to reset settings to factory settings? Is it possible to flash the device yourself? You will find answers to these and other questions in our guide.

We'll sort it out technical specifications devices, typical errors and fault codes, and also give step-by-step instructions for updating the firmware and connecting additional devices. We will pay special attention compatibility with different Nissan models and nuances of integration with the vehicle’s CAN bus - This is a key point that even experienced car owners often overlook.

Specifications Clarion 08IT

Device Clarion 08IT belongs to the series Nissan Connect and is equipped with a 7-inch touch screen with resolution 800×480. It is based on the processor Renesas SH7750 with a clock frequency of 400 MHz, which ensures stable operation of the navigation system and multimedia applications. Key features include:

  • 📻Support FM/AM radio with RDS function
  • 🎵 Play audio files in formats MP3, WMA, AAC
  • 📱 Integration with smartphones via Bluetooth (profiles A2DP, )
  • 🗺️ Built-in navigation with maps Navteq or Here (depending on region)
  • 🔌 Connectors USB (type A), Aux-In, SD card (up to 32 GB)

It's important to note that Clarion 08IT runs a proprietary OS Nissan Connect, which does not support installation of third-party applications. However, some owners have successfully modified the firmware to add Android Auto or Apple CarPlay — we will talk about this in the section about updates.

⚠️ Attention: Firmware versions for the European and Japanese markets are not compatible! Installing inappropriate software may result in complete blocking devices. Always check your region before updating.
Parameter Meaning
Screen 7" TFT, 800×480, touch (resistive)
RAM 256 MB
Built-in memory 4 GB (for cards and software)
Supported languages Up to 20 (including Russian, English, Japanese)
CAN bus Protocol support Nissan Consult III

Connection diagram and pinout of connectors

Installation Clarion 08IT in Nissan requires understanding of the main connector pinout ISO 10487 (24-pin). Connection errors can lead to a short circuit or failure of the multimedia control unit. Below is the basic diagram for the models Qashqai J11 And X-Trail T32:

  • 🔴 Pin 1 — +12V constant (yellow wire)
  • 🔵 Pin 2 — Right front sound (+)
  • ⚪ Pin 3 — Sound left front (+)
  • ⚫ Pin 4 — CAN-High (green/white)
  • 🟢 Pin 5 — CAN-Low (green/black)

A separate connector is used to connect the rear view camera MINI-DIN 8-pin, where:

  • 📹 Pin 1 — Video input (RCA)
  • 🔋 Pin 4 — +12V when reverse gear is engaged

If the radio does not turn on after installation, check:

  1. Availability 12V on pin 1 (constant food).
  2. Fuse integrity F37 (10A) in the fuse box.
  3. Correct connection CAN buses — without it, the device will not interact with on-board electronics.
📊 What Nissan model do you have?
  • Qashqai (J10/J11)
  • X-Trail (T31/T32)
  • Juke (F15)
  • Other model

Firmware update: step-by-step instructions

Firmware Clarion 08IT may be required to fix bugs, add new features or support modern smartphones. Official updates are distributed through dealerships, but you can install them yourself. You will need:

  • 💾 USB flash drive (FAT32, up to 32 GB)
  • 📄 Firmware file (for example, NissanConnect_2.56.0_EU.zip)
  • ⚡ Started car (at least 12.6V on the battery)

Update algorithm:

  1. Download the firmware from the official website Nissan Connect (choose the version for your region!).
  2. Unzip the archive and copy the folder UPDATE to a USB flash drive.
  3. Insert the flash drive into the radio port (usually located on the right under the screen).
  4. Go to menu Settings → System → Software Update.
  5. Confirm the start of the process - the device will reboot and begin installation (about 20-30 minutes).
⚠️ Attention: If during the update the on-board voltage drops below 11.8V, the radio may become “bricked”. Use a voltage stabilizer or connect a charger to the battery.

Download the firmware for your region|Format USB to FAT32|Check the battery charge (at least 70%)|Disable all consumers (headlights, air conditioning)|Have a backup copy of the settings on hand-->

After a successful update, the radio will automatically reboot. If the screen remains black for more than 5 minutes, perform factory reset:

  1. Press and hold the button EJECT (remove disc) for 10 seconds.
  2. While holding it, turn on the ignition - wait for the logo to appear Nissan.
  3. Release the button and select Reset to Default in the recovery menu.
What to do if the firmware is not installed?

If the radio does not see the update file:

1. Check the folder name - it should be **UPDATE** (capital letters!).

2. Make sure the USB drive is formatted in **FAT32** (not NTFS or exFAT).

3. Try a different drive - some flash drives are not compatible with the port.

4. If error **E04** appears, it means the firmware file is damaged or is not suitable for your model.

Common errors and their solutions

Radio tape recorder Clarion 08IT may produce errors of both software and hardware nature. Below is a table of the most common fault codes and how to fix them:

Error code Description Solution
E01 Error reading SD card or USB Format the drive to FAT32, check the file system for errors
E03 Problem with CAN bus (no connection with vehicle) Check the connector connections CAN-High And CAN-Low, clean contacts
E10 Navigation system failure (no GPS signal) Update the firmware, check the GPS antenna (located under the dashboard)
E15 Bluetooth module error Reset Bluetooth settings in the menu or update the firmware
E99 Critical system error (possibly software corruption) Perform a hard reset or reflash the device

If the radio doesn't turn on at all, the reasons may be as follows:

  • 🔋 Eating problems - check the fuse F37 and voltage at the connector.
  • 🔌 Short circuit in the screen backlight circuit (a common problem after unqualified installation).
  • 🖥️ Firmware failure - Re-flashing via service mode is required.

You can use a scanner to diagnose hardware problems Nissan Consult III or universal ELM327 with the program Nissan DataScan. These tools allow you to read CAN bus errors that may affect the operation of the radio.

💡

If, after replacing the battery, the radio requires entering a code, it can be found on a sticker under the glove compartment or in the service book. For models with Nissan Connect The code often matches the last 4 digits of the VIN.

Integration with Android Auto and Apple CarPlay

Standard firmware Clarion 08IT does not support Android Auto or Apple CarPlay, but there are ways to add them. The most reliable option is to install an external adapter, for example:

  • 📱 Carlinkit 3.0 - connects via USB and emulates the operation of a smartphone.
  • 🔌 AAWireless - wireless adapter for Android Auto.
  • 🍎 CarPlay2Air - solution for Apple CarPlay via Wi-Fi.

To connect the adapter:

  1. Insert the device into the port USB radios.
  2. Turn on Bluetooth on your smartphone and complete pairing.
  3. Launch the application Android Auto or CarPlay on the phone.
  4. On the radio screen, select the source USB or Bluetooth Audio.

Alternative way - firmware modification with added support Android Auto. To do this you will need:

  1. Download custom firmware (for example, NissanConnect_AA_mod.rar).
  2. Install it through the service menu (access by pressing Menu + Eject + Power).
  3. Connect your smartphone via USB and activate developer mode.
⚠️ Attention: Modified firmware may lead to loss of warranty and unstable navigation. We recommend creating backup copies of the original software before experimenting.

Clarion 08IT replacement and repair

If the radio is out of order, it can be repaired or replaced with an analogue one. The average cost of a new device is 25,000–40,000 rubles, depending on the region. Popular replacements include:

  • 📻 Clarion NX809 - improved version with support Android Auto.
  • 🎛️ Pioneer AVH-Z5200BT — universal radio with a large screen.
  • 🚗 Nissan Original 28500-4M00B - original replacement for Qashqai.

When choosing an analogue, pay attention to:

  • 🔌 Connector compatibility - An adapter may be required.
  • 📡 CAN bus support for correct operation with on-board electronics.
  • 🔊 Amplifier power — the original radio has 4×20 W.

For repair Clarion 08IT often required:

  • 🔧 Replacement of the touch screen (cost - from 5,000 rubles).
  • 🔋 Repair of the power supply (capacitors burn out 1000µF 16V).
  • 📶 Replacing the antenna module (if there is no GPS or radio signal).

Self-repair is possible if you have experience with a soldering iron and a multimeter. To replace the screen you will need:

  1. Remove the radio from the panel (unscrew the 4 bolts in the corners).
  2. Disconnect the screen cable and carefully separate it from the body.
  3. Install a new sensor module and connect the cable.
💡

When purchasing a used Clarion 08IT radio, be sure to check that it works with your car - some devices are tied to the VIN and may not be activated.

Frequently Asked Questions

How to reset Clarion 08IT to factory settings?

There are two ways:

  1. Soft reset: Go to Settings → System → Reset data and confirm the action.
  2. Hard reset: Press and hold the button EJECT, turn on the ignition and hold the button for 10 seconds until the recovery menu appears.

After the reset, you may need to reactivate the navigation (enter the code from the service book).

Why doesn't the touch screen work?

The reasons may be as follows:

  • 📱 Screen dirty - wipe it with an alcohol wipe.
  • 🔧 Damage to the cable - Requires disassembly and replacement.
  • 🔋 Firmware failure — try updating the software.
  • 🌡️ Overheating — if the radio has been working in the sun for a long time, let it cool down.

If the screen only responds to strong pressure, the resistive layer is most likely worn out and needs repair.

Is it possible to connect a rear view camera from another manufacturer?

Yes, but two conditions must be met:

  1. The camera must have analog output (RCA).
  2. The camera supply voltage must be 12V (some Chinese models operate on 5V).

The connection is made to the connector MINI-DIN on the back of the radio. If the image is upside down, activate the option in the camera menu Mirror Mode.

How to update navigation maps?

Official maps are updated through the dealership, but alternative solutions can be used:

  • 🗺️ Download current maps Here or Navteq in format .fbl.
  • 💾 Copy them to SD card to a folder Nissan/Navi.
  • 🔄 Restart the radio - new cards should be detected automatically.

For models with Nissan Connect 2.0 version cards are suitable 2022-2023. Newer versions may not be supported.

Why doesn't the radio see the USB drive?

The problem is usually related to:

  • 💾 File system - use only FAT32.
  • 🔌 Port failure — check USB on another device.
  • 📁 Folder structure - the music must be in the folder Music, video - in Video.
  • 🔋 Lack of food - some flash drives require more current than the port can provide.

If USB works but does not play files, check their bitrate - the radio does not support MP3 with higher bitrate 320 kbps.